Catalog
Loading...
fuentes RSS
No RSS feed added
Surface temperature transducer.The NTC10KSUP is a surface temperature transducer made up by a 30x30x6mm aluminium plate provided with two holes for an easy fix. May be interfaced with:All WineCap™ product line dataloggers with NTC10KΩ BETA 3977 transducer input (WSDxx-xx10KB1/SDxx-xx10KB1)All WineCap™ product line probes withNTC10KΩ BETA 3977 transducer...
Temperature Transducer.: PT 1000 class "A" The PT1000CNT is a temperature transducer to acquire surface temperatures.The class “A” PT1000 sensible element is made by a brass block, meanwhile the cable insulation is realized in poly-propylene for the conductor an in thermoplastic rubber (TPE) for the secondary insulation.
3 channels Wireless Smart Datalogger- Interface module provided with 3 inputs for wind speed, direction and solar radiation- Type "C" lithium internal battery for a battery life up to 5 years with samples every 10 minutes- IP 65 sealing (to be used with AN6410 and ANS-RSG-B transducers).
Certification: CE-EMC, CE-LVD, RoHS, ISO9001 AO-600-07 Data Logger includes Data Acquisition, storage, transmission and management, and many other functions.
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Two wires class "A" PT1000 for cryogenic use► Stainless steel finger Ø 6x50 mm► Complete with 2 meters teflon shielded cable► Operating temperature -200÷150°C.
Turn any analog sensor into an SDI-12 compliant sensor using the SDI-12 Sensor Translator.This small but powerful device will sample any analog, or one wire sensor and interface it to the SDI-12 bus.It handles all of the complex SDI-12 protocols, it is simple to use, and is inexpensive to implement in production units.
Replace your expensive data logger, and turn your PC into an affordable SDI data logger with the SDI-12 to USB Protocol Translator board.Plug in the board into a USB port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
Replace your expensive data logger, and turn your PC, modem or wireless interface into an affordable SDI data logger with the SDI-12 to RS232 Protocol Translator board. Merely plug in the board to a RS232 port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.
Anemometer-Thermometer Data Logger for air speed measurement which use hot-wire or vane probes, for temperature Pt100 sensor with SICRAM module.
AST.1 telescopic shaft or AP471S1.23.6 / AP471S1.23.7 fixed extension shafts available on request.2 m cable.Probe complete with SICRAM module.
StellarRAD™ Series 3 are rugged, turn-key solutions for portable light measurement.The handheld radiometer is an easy-to-use research-grade spectrometer for field testing of lights with no additional setup required.The NIST traceable system can measure spectral Irradiance & Illuminance, CCT, xy chromaticity, CRI, PAR, and much more!
Included in delivery: U0141 Instruction manual Traceable calibration certificate 1 x 3.6 V lithium battery Free analytical software COMET Vision EXTERNAL PROBES ARE NOT INCLUDED IN DELIVERYUSB COMMUNICATION CABLE NOT INCLUDED IN DELIVERY. See Accessories tab.
► Room operator panel device► 8 x Button with temperature up/ down, fan up/ down, sunblinds up/ down, light, and menu► Front in black or white► Modbus, NFC► Temperature, rel. Humidity, ext. switch/NTC, infrared receiver
Single-three phase counter / energy analyzer (up to 3 single-phase lines).
BAROsense; a complete series of barometric pressure transmitters with measuring range 300 - 1100 hPa.
HY-WDS2E Ultrasonic 2D Anemometer is a compact ultrasonic wind speed and wind direction sensor. It is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction. Using ABS shell, Weight is lighter and Structure is more stable. Build-in own intelligent heating module, It can work normally under the cold and...
Suitable for:• Suplying voltage to External transducers• 0÷5V, 0÷10V, 0÷25Vdc o 0÷25mA inputsMain features:• Easy to install• IP65 sealing• Up to 3 years of battery life
◆ % r.H., g/m³, g/kg, DP °C◆ -30...+70°C, -20...+80°C, 0...+50°C, 0...+100°C◆ output 0-10 V, 4-20 mA, changer◆ heating function for condensation protection◆ accuracy ±3% r.H.◆ hinge lock technology
Temperature, humidity, carbon dioxide t-line Web sensor with Power over Ethernet feature. Remote alarm. Processing and analysis of measured data:- online in COMET Cloud- COMET Database software- integration into 3-party systems
◆ The Mi550 handheld three phase power quality analyzer connects externally with open type Rogowski coils or voltage type CT's.◆ It is suitable for:- realizing non-dismantling wire tests- simplifying test steps- saving construction costs- engineering tests- inspection and maintenance of distribution systems
The recording is performed in a non-volatile electronic memory.The data can be transferred to a PC via USB-C.In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.The U0141T includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC...