Catalog
Loading...
fuentes RSS
No RSS feed added
D-shell connector to mini-USB style plug, reference electrode broken into external white wire with barrel connector, for use with external reference electrode and for use with WaveDriver 10 and WaveDriver 20
The CCK series corrosion cell kit is based on a standard glass reaction flask, 1 liter, 500 ml or 100ml. All wetted parts are made of chemically resistant materials such as Teflon, Pyrex and SUS 316. The standard cell configuration consists of a cylindrical metal sample working electrode, a graphite rod, a counter electrode, a gas bubbling tube, and a...
The cell voltage & temperature monitoring system, cX series, is a flexible systems to monitor voltage and temperature, and it is also suitable for use in a wide variety of applications.The system has 16 voltage monitoring channels and can be extended to up to 128 channels. On the other hand, it provides 8 channels of temperature monitoring which is...
E3 Series Fixed-Disk RDE tips featuring a 12.0 mm OD PTFE from Pine Instruments
The flat cell kit was designed to evaluate plate material such as metal (coupons), semi-conducting plate, etc. A sample plate will be placed one sample holder by fixing knob and maximum 300ml sample volume is acceptable. A water jacketed version is also available. A graphite plate which is placed in one side of the cell is supplied with a cell and can be...
Humidifier unit is used to provide humidification to two reactant gas supply lines for the electrochemical testing of PEM, alkaline and phosphoric acid fuel cells.It provides enough capacity for single cells and fuel cell stacks.This unit is often used to support the MTS-150, MTS-A-150 and ECL-150 units to provide manually controlled fuel cell testing.
‘LN65AC’ is the latest ‘air cooled’ Liquid Nitrogen Generator from Noblegen Products. Using the reliable and efficient PSA technique of separating Nitrogen and Oxygen is used to produce high quality Nitrogen Gas which is then liquefied using our powerful cooling system. The liquid nitrogen is stored within a suitable sized vacuum insulated tank and the...
- Four electrode technique- Material - Cell body: PEEK - Wire: platinum- Operating temperature: to 130 ̊C- Fuel cell hardware available: 5, 9 and 25 cm2 fuel cell test hardware (not included, provided by WonATech)- Easy to assemble
The MCJ Through-plane conductivity test jig helps user to setup a 2-probe electrochemical cell consisting of 2 stainless steel probes that sandwiches the membrane to measure through-plane conductivity of membranes.The MCJ is designed to hold a membrane by pulling a lever.Normally, a number of galvanostatic alternating current(AC) electrochemical impedance...
Electronic Load 2 Precision Calibrated Mass Flow Controllers 2 Back Pressure Regulators 1 Temperature Controller
The multiplexer, MUX8B, is designed for use with the ZIVE SP2, SP5 single channel potentiostat, BP2 dual potentiostat and MP2, MP5 multichannel potentiostat.The MUX8B allows user to covert the single channel potentiostat or multichannel potentiostat into a powerful instrument suitable for sequential 8 cell operation per channel.Although up to eight cells...
The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • standard type• one optical window...
The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Two optical windows arranged to...
The photoelectrochemical cell having a wide optical window is designed to characterize electrode material under lighting condition. The 2 or 3 electrode test is available. Based on a standard model, PCELL1, the attachments are interchangeable between cells according to user’s applications. It is a gas tight sealed cell. • Cell kit with specimen holder•...