Catalog
Loading...
fuentes RSS
No RSS feed added
- Electrochemical Sensor.- O3 alarm: 5 and 10 ppm* Built-in 32-bit MCU, high reliability and self-adaptive capacity. Other Gases Detected (See Specifications and Consult Prices):Combustible gas (CH4, C3H8, H2) and toxic gas, oxygen, other rare toxic gases such as ammonia, NO, PH3, NH3, NO2, HCN, SO2, etc. also available, can be specified by the customer...
0-5 m/s, 0...+50°C 0-10 V, 4-20 mA LCD display, relay 5 scales per device
Datalogger with integrated sensors for humidity, temperature, light and barometric pressure as well as two sockets for external probes and signals.4 Million readings, operating range -40 to +90ºC, IP65 rated.Internal Temp./Rel. Humidity, Pressure + LightSupplied with YoyoLog View software, USB lead and long life battery.
Conductivity/Salinity conditioning solution 6 x 14 ml
Conductivity Standard 1413 uS/cm, 6 x 14 ml
Conductivity Standard 12.9 mS/cm, 6 x 14 ml
pH 7.00 buffer solution, 6 x 14 ml
5000 Series Remote Particle Counters The Particles Plus 5301 remote particle counter measures from 0.3 to 25 µm with a flow rate of 0.1 CFM (2.83 LPM) and can display up to 6 channels of particle size, as well as Temperature, Humidity and Barometric Pressure on its touchscreen at 4.3 "color. This continuous use particle counter uses the best long lasting...
Industry's highest concentration of 15,000,000 particles t³ @ 10% coincidence loss Ideal for use in research, industrial health & safety, and indoor air uality applications The most comprehensive internal self-diagnostics of any air quality monitor Remote diagnostics allow for remote service investigation through the Internet Can be used as bench-top...
The Particles Plus 5301P Remote Particle Counter measures 0.3 μm to 25.0 μm with a flow rate of 0.1 CFM (2.83 LPM) and is the most feature-advanced remote particle counter available with internal vacuum pump. Integration is easy into a building automation and cleanroom management system via Ethernet or (optional) Wireless 802.11 b/g.The 5301P remote...
Measures the concentration of mass in μg / m³ and the indication of PM (Particle Matter)Measure up to 6 simultaneous data channels.Measure CO2, temperature and relative humidity with user alarm set pointsMeasures TVOC in parts per billion (Model 5302-AQM)User adjustable one and two point sensor calibration compensationUser-selectable channel...
• Industry's highest concentration of 15,000,000 particles / Ft³ @ 10% coincidence loss• Ideal for use in Cleanrooms, Industrial Health & Safety and Air Quality applications• Unparalleled and most comprehensive internal self-diagnostics of any remote particle counter• Remote diagnostics allows for remote service investigation through the Internet•...
This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof
Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.
• Industry's highest concentration of 15,000,000 particles/Ft³ @ 10% coincidence loss• Ideal for use in Cleanrooms, Industrial Health & Safety, and Air Quality applications• >10 hours continuous operation on a fully charged battery• Industry's first Sleep Mode and Power Conservation Mode with intelligent battery• Unparalleled and most comprehensive...
Model 83030.3 – 25 µm @ 0.1 CFM The Particles Plus® 8303 Handheld Particle Counter measures 0.3 to 25 µm with a flow rate of 0.1 CFM (2.83 LPM) and can display up to 3 particle size channels as well as (optional) temperature and humidity data.
Model 85030.5 µm – 25 @ 0.1 CFM The Particles Plus® 8503 Handheld Particle Counter measures 0.5 to 25 µm with a flow rate of 0.1 CFM (2.83 LPM) and can display up to 3 particle size channels as well as (optional) temperature and humidity data.