No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Catalog
Water Quality
-
0040-10D LAQUA Electrode pH ISFET (Ion Sensitive Field Effect Transistor)
The Ion Sensitive Field Effect Transistor (ISFET) pH electrode has a semiconductor based sensor located less than 100 µm from the flat surface of the tip.
-
-
1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)
Very durable minimum alkali errors. Most widely used for general pH measurements.
-
1076A-10C LAQUA Electrode for pH Glass Body (Measurement of Low Conductivity Water and Non-Aqueous Solvents)
Uses a glass membrane highly sensitive to lowconductivity water and nonaqueous solvents. Can also be used for ordinary pH measurement.
-
-
2060A-10T LAQUA pH Electrode Standard Type (Simple Union Half-Cell Reference Electrode)
Suitable for a wide range of pH measurements since the resistance of the liquid junciton is small
-
2565A-10T LAQUA pH Electrode Type of Double Union (Reference Electrode of Half Double Stack Cell)
Suitable for measurements of liquid other than normal aqueous solutions, such as suspensions, emulsions, paste, and non-aqueous solutions. When the potassium chloride solution of the internal solution reacts with the sample, measurements can be stably carried out by filling the sample or any other chloride solution in the external jacket. The replacement...
-
-
3551-10D LAQUA Conductivity Electrode (Submersible Type / Low Water Conductivity) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3561-10D LAQUA Conductivity Electrode (Flow Type / Low Conductivity Samples) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3573-10C LAQUA Conductivity Electrode with Crystal Body (For High Conductivity Water) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3710E Electronic Monitor your crop and soil Water loss Through Evapotranspiration
Evapotranspiration (ET) is the process by which water is transferred from the soil to the atmosphere, either by the plant or directly from the soil surface
1 386,00 € -
4163-10T LAQUA pH Electrode (Temperature Compensation Electrode)
Used to automatically compensate the changes in the electromotive force of the pH electrode due to temperatures and also to measure temperatures.
-
5002S-10C LAQUA Ammonia Electrode (NH3) (Combination)
Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.
