No RSS feed added
2 - Subcategories
Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing / Wiring language. Besides easy-to-use hardware and software interface, Arduino is designed to be as flexible as possible to fit your project's needs.
Interactive Computerized Automotive System The whole system has been modularized to provide electronic and automotive courses with step-by-step experiments on educational technology training.All theoretical, experimental and practical learning procedures are supported by personal computer assisted supervision and dedicated software.The KL-800 can simulate...
The ETS-7000A Digital-Analog Training System is designed for the beginners to enhance the comprehension of digital and analog theory.The design of Digital-Analog Training System is easy to operate and easy to understand. ► CE marking
The ETS-5000 Advanced Digital Training System is designed for the beginners to enhance the comprehension of advance digital theory.The design of Advanced Digital Training System is easy to operate and easy to understand. ► CE marking
BASIC COMMUNICATION SYSTEM - for educational teaching, training, and learning of analog & digital telecommuncation / AM / FM / DSBSC / ASk / FSK / PSK / QPSK / CVSD / TDM / FDM / PWM / Manchester
The KL-500 Industrial Electronic Trainer is a self-contained training equipment allowing students to learn more than 70 experiments through a power supply unit and 16 replaceable modules.
The KL-600 Advanced Sensor Training System is a comprehensive sensor / transducer control training system that incorporates industrial-grade components with various control circuits and load units. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.
The KL-620 Basic Sensor Experimental Lab is a comprehensive sensor / transducer control training system. Its modular and closed-loop control circuits allow implementation of open-ended, individual control loops used in industrial applications.
MEMS (Micro-electromechanical Systems) based sensors such as accelerometer, gyroscope and magnetometer, are crucial components used in smart portable devices, such as smart phone and tablet PC. The demand of MEMS sensors has been increased dramatically and identified as one of the most promising technologies nowadays.
ACS-1000, covered with many technical disciplines, explicates the central significance of Analog Control System. This applies particularly in mechanical and electrical engineering, and as well in production and process technology. It is indispensable to plant and system technology.
Explosive growth in network device diversity and mobile communications, along with global adoption of networking technologies, have overwhelmed IPv4 and have driven the development of a next-generation Internet Protocol (IPv6).
MTS-887. PIC16F Training Lab which uses Microchip's PIC16F887 is a 8-bit microcontroller to implement various I/O control experiments. This controller contains most of the powerful functions in modern MCUs nowadays.
LV-200 LabVIEW I /O Interface Lab is a platform of hardware / software development. It offers a variety of I /O and peripheral devices used in real life and adopts National Instruments LabVIEW (G programming language) as development software.
An interface is a hardware and software data transmission regulator that controls data exchange between the PC and other peripheral devices, including RS-232C, AT-BUS, IDE, SCSI, ISA, PCI, AGP, IrDA, GPIB, USB, IEEE-1394, Wireless etc...
CIC-310 CPLD/FPGA Development System is self-contained system, which contains stabilized DC power supplies, Development Board , and Experiment Board. CIC-310 also provides digital system designers for hardware verification which enables students to learn digital system design efficiently.
CIC-560 training system is designed based on the latest digital technology in conjunction with EDA experimental teaching material. This training system consists of FPGA chip with higher logic elements and large number of pins. Therefore, students are able to develop, implement and verify design of basic or advanced digital circuit, digital signal...
CIC-500 is a DSP development system designed for learning DSP hardware implementations. The system combines both DSP chip for signal processing and FPGA chip for I/O control.
Simple, Easy, Fast, and Fun PSoC (Programmable System on a Chip) is one of the most innovative technologies nowadays. Instead of adopting a traditional MCU with fixed peripherals, or designing a circuit with discrete analog and digital components, the designer can select a single off-the-shelf PSoC on a complete project for mixed-signal...
KR-101 completely places all essential refrigerator components on the front panel of the system. Only when students understand the operation principal of the refrigerator they can connect the components correctly.
The design principle of KR-102 is to train students the refrigerator circuit, system processing, welding copper tube, and other related skills.
Modern mini ice plant system, an ideal solution to understand the different freezing methods(ex: ice transparency) relative to industrial level. (Air compressor is optional and locally prepared)
Due to its lower level of indoor noise and high flexibility of installation, Split Type Air Conditioner becomes more and more popular in nowadays. KR-212 itself is a real split type air conditioner especially designed for teaching purpose. Both indoor and outdoor units are installed on the demonstration stand so students can learn the operating principle...