UX120-006M HOBO 16-bit 4-Channel Analog Data Logger

UX120-006M

Onset

New

199,00 €

tax excl.

Add to wishlist

Number of Channels 4 Analog
ADC Bits 16 bit
Precision ±0.1 mV
Resolution 40 µV
With Display LCD
IP Classification Indoor IP50
Communications USB
Battery Life 1 year +
Memory Capacity 1.9 million measurements

The HOBO UX120-006M Analog Logger is a high-performance (16-bit), LCD display data logger for building performance monitoring applications.

As Onset’s highest-accuracy data logger, it provides twice the accuracy of previous models, a deployment-friendly LCD, and flexible support up to four external sensors for measuring temperature, current, CO2, voltage and more.

The logger is ideal for energy audits, building commissioning studies, equipment scheduling, and more.

  • Twice the accuracy over previous models with 16-bit resolution
  • Flexible support for a wide range of external sensors
  • LCD confirms logger operation and displays near real-time measurement data
  • Provides minimum, maximum, average and standard deviation logging options
  • On-screen alarms notify you when a sensor reading exceeds set thresholds
  • Stores 1.9 million measurements for longer deployments between offloads

Environment:
The UX120-006M Data Logger is for use in Indoor environments

Measurements:
The UX120-006M Data Logger supports the following measurements (some sensors sold separately):

Temperature, 4-20mA, AC Current, AC Voltage, Air Velocity, Carbon Dioxide
IMPORTANT: HOBO data loggers require HOBOware software (USB interface cable included w/CD purchase). See compatible items above.

Logger w/Cable

Measurement Range:
4-20mA (w/CABLE-4-20MA) 0 to 20.1 mA
0 to 2.5 V (w/CABLE-2.5-STEREO)
0 to 5 V (w/CABLE-ADAP5)
0 to 10 V (w/ CABLE-ADAP10)
0 to 24 V (w/ CABLE-ADAP24)

Accuracy: 
4-20mA ±0.001 mA ±0.2% of reading (w/CABLE-4-20MA) 
±0.1 mV ±0.1% of reading (w/CABLE-2.5-STEREO) 
±0.2 mV ±0.3% of reading (w/CABLE-ADAP5)
±0.4 mV ±0.3% of reading (w/ CABLE-ADAP10)
±1.0 mV ±0.3% of reading(w/ CABLE-ADAP24)

Resolution:
0.3 µA 4-20mA (w/CABLE-4-20MA)
40 µV (w/CABLE-2.5-STEREO)
80 µV (w/CABLE-ADAP5)
160 µV (w/ CABLE-ADAP10)
384 µV (w/ CABLE-ADAP24)

Logger

Operating Range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing);
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging Modes: Normal, burst, or statistics
Memory Modes: Wrap when full or stop when full
Start Modes: Immediate, push button, date & time, or next interval
Stop Modes: When memory full, push button, or date & time
Restart Mode: Push button
Time Accuracy: ±1 minute per month at 25°C (77°F), see Plot A
Battery Life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery Type: Two AAA 1.5 V alkaline batteries, user replaceable
Memory: 4 MB (1.9 million measurements, maximum)
Download Type: USB 2.0 interface
Full Memory Download Time: Approximately 1.5 minutes
LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Size: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Weight: 107.5 g (3.79 oz)
Environmental Rating: IP50

 COMPARISON TABLE

Actual Model

Discontinued Model

 
UX120-006M U12-006

LCD

Yes

No

Memory

1.9 Million Measurements

43,000 measurements

Accuracy

±0.1 mV ±0.1% of reading

± 2 mV ± 2.5% of absolute reading

Resolution

40 µV (16-bit)

0.6 mV (12-bit)

Accuracy with TMCx-Hx Temperature Probe (sold separately)

±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)

±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F)

Accuracy with CTV-x AC Current Sensor (sold separately)

±2.1% of Full Scale

±4.5% of Full Scale

Wrap When Full

Yes

No

Visual Alarms

Yes

No

Minimum, Maximum, Average & Standard Deviation Logging Modes

Yes

No

Burst Logging Mode

Yes

No

Improved Case Design (includes built in Rare-Earth Magnets and mounting tabs)

Yes

No

Dimensions

10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)

5.8 x 7.4 x 2.2 cm (2.3 x 2.9 x 0.9 in)

Compatible with HOBOware, and USB Cable

Yes, Works with a USB Cable and HOBOware 3.6 software

Yes

Compatible with HOBO U-Shuttle

No

Yes 

Compatible Sensors:

30 other products in the same category:

Customers who bought this product also bought: