RG3-M Rain Gauge with HOBO Data Logger UA-003 View larger

RG3-M Rain Gauge with HOBO Data Logger UA-003

RG3-M

Onset

New

669,00 €

tax excl.

Add to wishlist

Number of Channels 2: Temp + Events
ADC Bits 10 bit
With Display No
IP Classification IP67
Communications Optic
Battery Life 1 year +
Maximum Pulse Rate 1 Hz (1 pulso per second)
Memory Capacity 52K readings
The Sensor measures: Rain & Temperature
Output Signal: Optical Base Station
Sensor for use in: Outdoor

The HOBO RG3-M Data Logging Rain Gauge is a battery-powered rainfall data collection and recording system which includes a HOBO® Pendant Event data logger integrated into a tipping-bucket rain gauge. (Includes HOBO Pendant Data Logger UA-003-64). Requires BASE-U-4 to offload data to PC.  

This model automatically records up to 3200 mm of rainfall data that can be used to determine rainfall rates, times and duration. Also records temperature when used with an optional solar radiation shield (RS1 Solar Radiation Shield, or M-RSA).
A base station or shuttle is required. Software is required to load rain data to the PC.

Features:

  • A high quality tipping-bucket rain gauge includes a HOBO Pendant Event data logger. Base station or shuttle is required.
  • Time and date stamp is stored for each tip - provides detail needed to determine rainfall rates and duration
  • Reliable, field-proven rain gauge
  • Also records temperature when used with an optional rain shield

Maximum Rainfall Rate: 12.7 cm (5 in.) per hour

Calibration Accuracy: ±1.0% (up to 1 in./hour for the RG3 or 20 mm/hour for the RG3-M)

Resolution: 0.01 in. (RG3) or 0.2 mm (RG3-M)

Calibration: Requires annual calibration: can be field calibrated or returned to the factory for re-calibration

Operating Temperature Range: 0° to +50°C (+32° to +122°F)

Storage Temperature Range: -20° to +70°C (-4° to +158°F)

Environmental Rating: Weatherproof

Housing: 15.24cm (6-in.) aluminum bucket

Tipping Bucket Mechanism: Stainless steel shaft with brass bearings

Dimensions: 25.72 cm height x 15.24 cm diameter (10.125 x 6 in.); 15.39 cm (6.06 in.) receiving orifice

Weight: 1.2 Kg (2.5 lbs)

Part Numbers: RG3 (0.01 in. per tip), RG3-M (0.2 mm per tip)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

Logger
Time Stamp Resolution: 1.0 second

Time Accuracy: ± 1 minute per month at 25°C (77°F), see Plot B on page 10.

Operating Range: -20° to 70°C (-4° to 158°F)

Environmental Rating (for logger used outside of rain gauge): Tested to NEMA 6 and IP67; suitable for deployment outdoors

NIST Traceable Certification: Available for temperature only at additional charge; temperature
range -20° to 70°C (-4° to 158°F)

Battery: CR-2032 3V lithium battery; 1 year typical use

Memory: 64K bytes – 16K to 23K tips when recording rain only; 25K to 30K data points when recording rain and temperature

Materials: Polypropylene case; stainless steel screws; Buna-N o-ring; PVC cable insulation

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU).

Temperature Measurement
Measurement Range: -20° to 70°C (-4° to 158°F)

Accuracy: ± 0.47°C at 25°C (± 0.85°F at 77°F), A solar radiation shield is required for accurate temperature measurements in sunlight.

Resolution: 0.10°C at 25°C (0.18°F at 77°F)

Drift: Less than 0.1°C/year (0.2°F/year)

Response time: Airflow of 1 m/s (2.2 mph): 10 minutes, typical to 90%

30 other products in the same category:

Customers who bought this product also bought: