LBIM-A10 Benchtop Ion Meter for Cl

This Ion meter comes with ±0.5% F.S. measurement accuracy. The direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg/L, mol/L. The mV measurement is used to check the performance of ion selective electrode.
Benchtop Ion meter is used to measure the chloride ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

• Large LCD display

• 2 -5 points calibration from low to high concentration

• Direct ion concentration readout for elaborate measurement process

• Selectable concentration units from ppm, mg/L, mol/L

• mV measurements to check the performance of ion selective electrode

• Temperature compensation provides accurate reading over the entire range

• Stability indicator to show current measurement status

• Calibration due reminder for regular calibration of the meter

• Auto hold function to freeze stable reading for better viewing & recording

• Automatic electrode diagnosis shows the slope of the sensor

• Reset setting function

• Expanded memory stores and recalls up to 500 readings

• Built –in real time clock stamps

• USB communication interface to transfer stored data to PC

Standard:

• Ion selective electrode (Cl, F, Na, Ca, Br, NH4)
• Temperature probe

• Standard solution (1000 ppm)

• Ionic strength adjuster (30mL)
• USB cable

• DC5V Power adapter


Optional:
 
• Ion selective electrode :[CL range: 1.8-35500 ppm, F range: 0.02 ppm to saturation, Na range: 0.1-23000 ppm, Ca range: 0.02-4000 ppm] [Br range: 0.4-79900 ppm,
NH4 range: 0.1 – 18000 ppm]
• Ion standard solutions: 480mL/ bottle
• Ionic strength adjuster: 480mL/ bottle
• Temperature probe with sensor