Catalog
Loading...
fuentes RSS
No RSS feed added
The RK500-06 ORP sensor is a simple and cost-effective solution for a wide variety of wastewater and process applications.
Complete integrated system for Sap Flow Measurement on trees.Up to 3 x two-needle sensors for measuring up to 3 trees.
The ultrasonic automatic weather station AO-900-10 uses the ultrasonic probe to measure wind speed and direction, without moving parts, instruments and compact structure, good reliability and long service life.
The ultrasonic liquid level transmitter AO-L-03 is a type of non-contact, high reliability, high cost of performance, easy installation and maintenance of the material level measuring instrument.
The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.
The diffusion head is designed for soil applications with an oxygen sensor.The head keeps soil and debris clear of the sensor opening to ensure accurate measurements.
DATA LOGGER HOLDERAD-MAST Data Logger Holder is used to attach a logger to an aluminium mast or any kind of similar construction.•available for all logger types manufactured byWind2measure.com.•fitted to the diameter of the mast•easy to install•equipped with a vibration absorber
Digital flow meter.Ultrasonic Flow Meter - RTU/Module
For checking inside of pipes to locate blockages.Cable lengths: 20 meters and 40 meters
For checking inside of pipes to locate blockages.Cable lengths: 20 meters and 40 meters
For checking inside of pipes to locate blockages.Cable lengths: 20 meters and 35 meters
Ultrasonic 2D Anemometer is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction based on principle of TOF (time of flight) of ultrasonic sound wave.Low power chip make its power consumption low to 0.2W. Using ABS shell, Weight is lighter and Structure is more stable
HY-WDC2THPE is developed based on AO-WDC2E by integrating temperature, humidity, and barometric pressure sensor, its specification refer to AO-WDC6SE. Weather station without shutter.
AO-WDC6E is developed based on the basic version AO-WDC2E by integrating temperature, humidity, barometric pressure, and precipitation sensor. A more advanced model AO-WDC6SE has solar radiation, UV radiation, luminance and PM1.0/2.5/10
HY-WDS2E Ultrasonic 2D Anemometer is a compact ultrasonic wind speed and wind direction sensor. It is designed to simultaneously measure the 2-dimensional horizontal components of the wind speed and direction. Using ABS shell, Weight is lighter and Structure is more stable. Build-in own intelligent heating module, It can work normally under the cold and...
AO-WDS2THPE is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor, its specification refer to AO-WDS9E.
AO-WDS6E is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor and precipitation sensor, its specification refer to AO-WDS9E.
AO-RSS11E is a non-contact road surface state detector, thanks to remote sensing technology it’s taken, it can not only avoid damage to the road, But also traffic interference during its installation.Multispectral measurement technology enables accurate detection of thickness of ice, snow, water on surface of the road.