Catalog
Loading...
fuentes RSS
No RSS feed added
Agricultural Investigation and Environmental Research.
These reusable jars are made to easily calibrate relative humidity in the pSense Portable CO2 Meter, the pSense High Accuracy Portable CO2 Meter AZ-0002, and the cSense CO2-Temp-%RH Meter with relay RAD-0201.Or the CM-501 portable CO2 Gas Detector. To use simply unstopper the jar, insert the probe into the jar, and start the calibration mode. It's that...
Transport case provides safe storage of the device, the power adapter and measuring probes during transport. Accessories are protected by a closable partition.External case dimensions: 357x305x95mm.
Thermal Flux sensor with thermopile for measuring heat flow through two surfaces (i.e. ground-air) in W/m². Out: μV ÷ mW, complete of Calibration Report and 5m cable.Available options for this sensor: (see also section Sensor Accessories )- MCS interface to have sensor outputs as current, voltage or in digital format on RS485 and Modbus protocol.
3 models:Ref TS1: small size magnetic transducer for pipe size: DN15-100mm, temp. of liquid ≤110 ℃Ref TM1: medium size magnetic transducer for pipe size: DN50-1000mm, temp. of liquid ≤110 ℃Ref TL1: Large size magnetic transducer for pipe size: DN300-6000mm, temp. of liquid ≤110 ℃
The device measures the temperature and concetration of CO2 from an internal sensors. Included in delivery: - W8810 - Instruction Manual - Traceable Calibration Certificate - 1x Lithium battery 3.6 V - Sigfox Connection for 1 Year - COMET Cloud for 1 Year - FREE Analytical Software COMET Vision
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.2 Models to select in attributes:AO-ST15 (15 meter band)AO-ST20 (20 meter band)
Available with heater for cold climatic condition (mod. PL400R) and with MCS module for signal normalization (0÷2Vdc, 4÷ 20mA, RS485/Modbus)
Illuminance sensor for outdoor use with 5m cable. Select Model by Range:LUX-B-a: 0.02 ÷ 2 klux aLUX-B-b: 0.2 ÷ 20 klux bLUX-B-c: 2 ÷ 200 klux Module MCS-light for RS485 & ModBus output sold separately (choose in Accessories).
AO-WDS6E is developed based on AO-WDS2E by integrating temperature, humidity, and barometric pressure sensor and precipitation sensor, its specification refer to AO-WDS9E.
The "flow through head" is designed for laboratory applications where an oxygen sensor is used. The head comes with 1/4 inch barbed nylon fittings for connecting to a hose, through which the air to be measured passes.
FluorPen FP 110 is a portable, battery-powered PAM fluorometer that enables quick and precise measurement of chlorophyll fluorescence parameters in the laboratory, greenhouse, or in the field. It can be effectively used for studying photosynthetic activity, stress detection, herbicide testing, or mutant screening. Affordable price and straight-forward...
Multi-sensor measuring device for CO2, humidity and temperature with traffic light display and tabletop stand. - CO2, Humidity, Temperature- power supply via plug-in power supply- CO2 traffic light- display- piezo buzzer- mute button
The suspension cuvette includes a 400 μL stainless steel sample compartment with a PVC exterior.
The MQ-210 quantum meter is designed for underwater PAR measurements and already applies the sensor's immersion effect correction factor to the meter readings through firmware.The meter is excellent for all light sources, except LEDs, where post-measurement correction factors need to be applied to achieve accurate readings.The waterproof sensor...
10m foldable Aluminum Mast for Weather Stations.
Pneumatic Telescopic Mast for Weather Stations
AO-520-02 is an integrated soil moisture, temperature & electrical conductivity (EC) sensor. Optional model available for pH Range: 3-9 pH (consult)
At AlphaOmega-Electronics you will find the best range of Data Loggers and at the most competitive prices.
Soil Temperature Sensor Probe Applications Environmental monitoring. Weather stations. Ice detection systems. Irrigation and sprinkler systems. Temperature monitoring of bulk foods.
The MQ-501 is designed to be an easy-to-use handheld meter for spot-check measurements.The meter includes the AM-001 meter mounting bracket to mount the sensor on a horizontal plane to the meter and approximately 0.17 m of cable to accommodate the bracket length.The full-spectrum sensor incorporates a blue-enhanced silicon photodiode and custom optical...
Call +34 916292106 or complete our form More info about this product
The HOBO MicroRX GSM Cellular Water Level Station is a web-enabled cellular water level monitoring solution for stormwater, flood, irrigation, hydrological and environmental applications.Preprogrammed water flow calculations for selected weirs, channels, and a stage discharge table result in easy and intuitive setup.
A type of digital anemometer used to measure wind speed, wind volume, and wind temperature.