Comet C3121P Thermo-hygrometer for compressed air measurement (-30 to +105°C) (5 to 95%RH)

C3121P

Comet System

New

Thermo-hygrometer (-30 to +105°C) (5 to 95%RH)

Thermometer, hygrometer is designed for direct measurement of temperature, relative humidity for compressed air up to 25 bars with 1m cable. Audio and optical alarm of measured values. Memory of minimum and maximum measured values. Function Hold - manual storing of actual values for later displaying.

Simultaneous reading of temperature and relative humidity, dew point temperature reading selectable, built-in sensors.

Warranty: 3 years

345,00 €

Add to wishlist

Environment of Use Indoor
With Display LCD
Type of Instrument Thermo-Hygrometer
The instrument measures: Temp. & Relative Hum.

Simultaneous reading of temperature and relative humidity, dew point temperature reading selectable, external temperature-humidity probe with 1meter cable. Cable lengths 2 and 4 meters available optionally.

  • Traceable calibration certificate
  • Instruction manual
  • Connector for external ac/dc adapter
Measured Value Relative Humidity + Temperature
Construction Type Compressed Air Humidity Up To 2.5MPa
Temperature Measuring Range -30 to +105°C
Data Logging Function No
Operating temperature range -10 to +60°C
Temperature sensor RTD Ni1000/6180ppm
Accuracy of temperature measurement with built-in sensor ±0.4°C
Accuracy of air humidity measurement ±2.5%RH from 5 to 95% at 23°C, resolution 0.1%
Dew point temperature range -60 to +80 °C
Accuracy of dew point temperature (for more details see instruction manual) ±1.5°C for dew point temperature +10°C and higher at ambient temperature +25°C
Accuracy of dew point temperature ±2.0°C for dew point temperature 0°C at ambient temperature +25°C
Accuracy of dew point temperature ±3.0°C for dew point temperature -10°C at ambient temperature +25°C
Accuracy of dew point temperature ±6.0°C for dew point temperature -20°C at ambient temperature +25°C
Power battery 9V
Battery life 4 months typically
Dimensions 141 x 71 x 27 mm, probe length 150mm, probe diameter 18mm
IP protection IP20 instrument, IP40 T+RH probe
Mechanical connection of the probe G1/2 with O-Ring
Length of the probe cable 1m, 2m or 4m optionally
Weight including battery without probe approximately 150 g
Warranty 2 years
Adaptador ac / dc 230Vac a 12Vdc / 0.5A
código: A1515
Batería recargable de NiMH. 9 V / 200 mAh
código: A3400

Protección de sensor de plástico con filtro de acero inoxidable (negro)
código: F5200B
Protección del sensor de PTFE, blanco
código: F5300
Escudo de radiación de placas múltiples
código: F8000
Estándar de humedad 10% RH, juego de 5 piezas
código: HM023

Estándar de humedad 80% RH, juego de 5 piezas
código: HM024
Recipiente para ajuste y calibración de humedad.
código: MD046
PP4 Brida circular plana
código: PP4
PP90 Brida de acero inoxidable en ángulo recto
código: PP90
Cámara de flujo para medición de aire comprimido hasta 25 bares
código: SH-PP














29 other products in the same category: