S-THB-M002 Temp/Rel. Humidity Sensor with 2 meter cable.

S-THB-M002

Onset

New

189,00 €

Add to wishlist

 S-THB-M002 Sensor Temp/H. R y cable 2 m.

The Sensor measures: Temp./Rel. Humidity
Output Signal: HOBO Smart Sensor
Cable Length: 1.8 m
Sensor for use in: Outdoor

The 12-bit Temperature/RH Smart Sensor is designed to work with all Onset data loggers that accept Smart Sensors.
All sensor parameters are stored inside the Smart Sensor, which automatically communicates configuration data information to the logger without any programming, calibration, or extensive user setup.
Air Humidity Sensor

Especificaciones:

Measurement Range:Temp: -40°C to 75°C (-40°F to 167°F)RH: 0-100% RH at -40° to 75°C (-40° to 167°F); exposure to conditions below -20°C (-4°F) or above 95% RH may temporarily increase the maximum RH sensor error by an additional 1%

Accuracy:Temp: +/- 0.21°C from 0° to 50°C (0.38°F from 32° to 122°F) . See Figure 1.RH: +/- 2.5% from 10% to 90% RH (typical), to a maximum of +/- 3.5%. See Figure 2 for full range.

Resolution:Temp: 0.02°C at 25°C (0.04°F at 77°F) See Figure 1 RH: 0.1% RH at 25°C (77°F)
Bits Per Sample:Temp: 12RH: 10
Drift:Temp: < 0.1°C (0.18°F) per yearRH: < 1% per year typical; hysteresis 1%
Response Time:Temp: 5 minutes in air moving 1 m/secRH: 10 minutes in air moving 1 m/sec with protective cap

Operating Temperature Range: -40°C to 75°C (-40°F to 167°F)

Environmental Rating Weatherproof: 0 to 100% RH intermittent condensing environments. For best results, the Temp/RH Smart Sensor should be mounted inside a protective enclosure, such as a solar radiation shield.

Housing PVC cable jacket with ASA styrene polymer RH sensor cap; modified hydrophobic polyethersulfone membrane

Sensor Dimensions: 10 x 35 mm (0.39 x 1.39 in)

Weight: 110 g (3.88 oz)

Number of Data Channels: 2

Measurement Averaging Option: No

Cable Lengths Available: 2.5 m (8.2 ft)

30 other products in the same category: