Rain-O-Matic-Pro Professional Rain Gauge (Precision: +/- 2%)

Pronamic

New

The Professional Rain-O-Matic-Pro Rain and Precipitation Sensor with our patented drain tank is one of the most accurate and reliable precipitation gauges on the market and for 30 years, we have supplied over 220,000 rain gauges to 41 countries on 5 continents.

Volume discounts

Quantity Price
You Save
%
1+ 205,00 € 0%
2+ 194,75 € 5%
5+ 184,50 € 10%
10+ 174,25 € 15%
20+ 147,60 € 28%
60+ 133,25 € 35%
100+ 123,00 € 40%

205,00 €

Add to wishlist

The Sensor measures: Rain (rain gauge)
Output Signal: Pulses
Power Supply: Does not require
Sensor for use in: Outdoor

RAIN-O-MATIC Professional patented self-emptying tipping bucket is one of the most accurate and reliable rain gauges on the market. It gives you advantages in:

  • More accurate measurements
  • Only one adjustment screw which makes it easy to recalibrate.
  • Bucket made in POM, which is a more dismissive material and therefore makes dust and dirt not stick so easily on the spoon and maximize water release

Calibration

Calibration is a very important issue for Pronamic and therefore all Professional rain gauges are manually calibrated. It gives you the guarantee for a very accurate measurement. Accuracy: +/- 2%.

Our professional rain gauges require minimal maintenance due to:

  • Outer shell is made from STYROSUN which makes the surface easy to clean.
  • High quality plastic materials and a simple design for a very long durability (10-20 years)

The PROFESSIONAL Rain-O-Matic-Pro is light (380 gr) but rugged which makes it perfect for:

  • Weather stations (MAWS)
  • Water works
  • Wastewater treatment plants
  • Hydropower stations
  • Irrigation
  • Agriculture
  • Military
  • Highway Authorities
  • Constructions
  • Engineers
  • Forestry 

1 Reed Relay PCB 9601 – item no. 300.021
- Professional rain collector, orifice 200 cm2
- PCB No. 9601 has a male connection and one reed switch. The reed switch is NC – Normally Closed.
- Resolution: 0.1 – 0.2 – 0.25 or 0.50 mm rain pr. Tip
- Inclusive of mounting angel brackets 500.310
- Instruction manual included

2 Reed Relays PCB 9602 – item no. 300.023
- Professional rain collector, orifice 200 cm2
- PCB No. 9602 has a terminal strip and two reed switches. The reed switches are NO – normally open and NC - normally closed.
- Resolution: 0.1 – 0.2 – 0.25 or 0.50 mm rain pr. Tip
- Inclusive of mounting angel brackets 500.310
- Instruction manual included

Calibration is a very important issue for Pronamic and therefore all Professional rain gauges are manually calibrated. It gives you the guarantee for a very accurate measurement. Accuracy: +/- 2%.

Rain-O-Matic Professional measures the precipitation by means of a funnel (orifice 200 cm2), which leads the water down into the self-emptying tipping POM bucket, held in place by a hard ferrite magnet. The magnet always exerts just enough tension to allow the measuring bucket to empty in one quick movement (less than 300 ms) and then return to its normal position, ready to once again collect precipitation. This means the counter weight always remains the same opposite to other conventional two spoons tipping bucket rain gauges. 

The rain gauge is mainly made in molded modified high-impact polystyrene also known as STYROSUN which is a highly weather-resistant polymer that reduces breakdown and discoloration.

STYROSUN which has passed the Arizona test is extremely resistant against the sun’s UV radiation and it is frost- and heat resistant standing all climatically conditions.

STYROSUN is resistant to common household cleaners, recyclable and easily decorated. 

30 other products in the same category:

Customers who bought this product also bought: