PyroCube Infrared Temperature Sensor with Fast Response 0°C to 500°C View larger

PyroCube Infrared Temperature Sensor with Fast Response 0°C to 500°C




Infrared Temperature Sensor with Fast Response

Add to wishlist


  • Response time as fast as 1 ms
  • Measured spot as small as 1.6 mm
  • Temperature range 0°C to 500°C
  • Continuous LED sighting shows the position and size of the measured spot while readings are being taken
  • Multilingual touch screen interface (optional)

Measurement Specifications

Temperature Range: 0°C to 500°C
Response Time (95%): 1 ms (-F models)
10 ms (-S models): Adjustable up to 5 s via averaging function
Measured Spot Diameter: From 1.6 mm (see Field of View Diagrams below)
Target Sighting: Red LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/off.
Accuracy of Measurement: ± 3°C or 1%, whichever is greater
Repeatability: ± 0.5°C
Temperature Resolution: <0.5°C

Electrical Installation

PM030 Touch Screen Interface

Provides temperature display, alarm outputs, sensor configuration and data logging for one PyroCube sensor.

Mounting Bracket

The L-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine rotational adjustment about one axis.

Protective Window

The protective calcium fluoride window helps prevent contamination and damage of the PyroCube sensor’s lens.


Air Purge Collar

Helps keep dust, moisture and contaminants away from the lens. Use clean (instrument) air.

Airless Dust Protector

Helps keep dust away from the lens. No air supply is required.

Extension Cable

5 metre long cable for PyroCube sensor, fitted with connectors at both ends.

Right Angled Mirror

Reflects the PyroCube sensor’s field of view by 90 degrees, making it easier to install in tight spaces. Includes a protective calcium fluoride window to keep dust from settling on the mirror and lens.

Water Cooling Jacket

Allows the sensing head to be installed where the ambient temperature is above 50°C. Includes an air purge inlet to stop condensation from forming on the lens. Please note that the sensor’s output cable is rated to 80°C.

PID Controllers

The analogue output of the PyroCube is compatible with any of ourindicating controllers for closed-loop PID control.

30 other products in the same category: