PyroCube Sensor de Temperatura por Infrarrojos con Respuesta Rápida 0°C A 500°C Ver más grande

PyroCube Sensor de Temperatura por Infrarrojos con Respuesta Rápida 0°C A 500°C




Sensor de Temperatura por Infrarrojos con Respuesta Rápida.


Tiempo de respuesta tan rápido como 1 ms
Punto medido tan pequeño como 1,6 mm
Rango de temperatura 0 ° C a 500 ° C
La visualización continua del LED muestra la posición y el tamaño del punto medido mientras se toman lecturas
Interfaz de pantalla táctil multilingüe (opcional)

Measurement Specifications

Temperature Range: 0°C to 500°C
Response Time (95%): 1 ms (-F models)
10 ms (-S models): Adjustable up to 5 s via averaging function
Measured Spot Diameter: From 1.6 mm (see Field of View Diagrams below)
Target Sighting: Red LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/off.
Accuracy of Measurement: ± 3°C or 1%, whichever is greater
Repeatability: ± 0.5°C
Temperature Resolution: <0.5°C
Emissivity Setting: Adjustable, 0.3 to 1.0, via RS232C or optional touch screen interface

PM030 Specifications

Touch Screen Display Format: 2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
Configurable Parameters:
Language (English, Chinese, Japanese)
Temperature units °C/°F
Displayed temperature
LED sighting on/off
Date & time (for data logging time stamps)
Peak hold period, decay level
Averaging period
Correction (gain/offset)
Emissivity setting (with teach function)
Reflected energy compensation (with teach function)
Output type
Output temperature range
Polarity on error
Alarm mode, levels, hysteresis
Field of View Diagrams
The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Accuracy specifications are valid up to the maximum distances shown.
Environmental Specifications (PyroCube Sensor)
Environmental Rating IP67
Operating Ambient Temperature 0°C to 50°C
Storage Temperature -15°C to 70°C

Electrical Installation

PM030 Touch Screen Interface

Provides temperature display, alarm outputs, sensor configuration and data logging for one PyroCube sensor.

Mounting Bracket

The L-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine rotational adjustment about one axis.

Protective Window

The protective calcium fluoride window helps prevent contamination and damage of the PyroCube sensor’s lens.


Air Purge Collar

Helps keep dust, moisture and contaminants away from the lens. Use clean (instrument) air.

Airless Dust Protector

Helps keep dust away from the lens. No air supply is required.

Extension Cable

5 metre long cable for PyroCube sensor, fitted with connectors at both ends.

Right Angled Mirror

Reflects the PyroCube sensor’s field of view by 90 degrees, making it easier to install in tight spaces. Includes a protective calcium fluoride window to keep dust from settling on the mirror and lens.

Water Cooling Jacket

Allows the sensing head to be installed where the ambient temperature is above 50°C. Includes an air purge inlet to stop condensation from forming on the lens. Please note that the sensor’s output cable is rated to 80°C.

PID Controllers

The analogue output of the PyroCube is compatible with any of ourindicating controllers for closed-loop PID control.

30 otros productos en la misma categoría: