Catalog
Loading...
fuentes RSS
No RSS feed added
El transductor de corriente tiene una apertura de 10mm de diámetro.
Solid core transducer. (does not open to insert the cable).Selectable amperage range:H721LC: 0 - 10/20 / 40AH721HC: 0 - 50/100 / 200AAnalog output: 4-20 mA, powered by external @ 12-30VDC Minimum Order: 2 Units
Flyer:H723/H923 Manual:H723/H923 Veris AC Current Transducers (0-10VDC output).H973 open coil & H723 closed coil, bothwith slide-switch selection for 3 different Amp Ranges. Minimum Order: 3 Units
D = Direction:1 = Non-Directional2 = DirectionalL = Length:1 = 152mm [6.0”] max insertion depth = 110 mm [4.3”]2 = 211mm [8.3”] max insertion depth = 169 mm [6.7”]3 = 287mm [11.3”] max insertion depth = 245 mm [9.6”]
- Up to 8 measured variables in one device - Choice of 16 sensors - Modbus RTU - high quality case and stainless steel tapsThis multi-sensor measuring device can be modularly composed of the following measured variables: temperature, humidity (also heated), air pressure, differential pressure, air quality (CO, CO2, VOC, O2, particle), flow, brightness and...
Portable luxmeter for measuring illuminance, luminance, PAR, irradiance (across VIS-NIR, UVA, UVB and UVC spectral regions or measurement of irradiance effective according to the UV action curve). Storage of maximum, minimum, average value. Functions: REL, HOLD and auto power off which can be disabled, IP 67 protection degree. LP471 series probes with...
Kit includes data logger, fused voltage input leads, DC current probe, pyranometer, USB lead, 12Vdc PSU, Electrosoft software and a carry case.
The compact and field rugged HOBO MicroRX Station is an easy-to-use and low-cost cellular solution for long-term, reliable monitoring in the field .There are two power source options available: a solar panel for extended deployments, and user-replaceable batteries for flexible mounting in covered or protected locations.The station includes inputs for up...
One voltage channel 300VacTwo models available, 60Aac or 400Aac range.Complete with Electrosoft energy analysis softwareSealed to IP65/NEMA 12/4 as standard The CT-2VA is a single-phase voltage and current data logger that uses a clip-on CT (current transformer) and plug to connect to the mains supply / equipment you wish to monitor. Setup the Logger...
The HOBOnet Field Monitoring System from Onset provides a cost-effective and scalable solution for web-enabled monitoring of field conditions for applications such as crop management, research, and greenhouse operations. BUYING IN BULK, OR JUST WANT SOME USEFUL ADVICE? Call +34 916292106 or complete our More info about this product form Onset Data...
The compact HOBO MicroRX Station is an easy-to-deploy, low-cost cellular solution for long-term, reliable monitoring of indoor conditions in warehouses, cold storage facilities, data centers, museums, commercial and residential buildings, and more.
- VdS, CE, DIBt approval- Built-in control unit (independent)- 2 alarm relays, 1 service alarm, 1 system error relay, 1 low flow relay, Modbus- Quick and easy installation.- Flow indicator with high sensitivity.- 4 installation positions 0, 90, 180 and 270 °- Test hole in the cover ◆ Needed Accessory Venturi Tube for smoke detection in ducts
The advantage of the Electrocorder products over most others is that our Data Loggers constantly sample information (recording the Minimum, Maximum and Average reading) over the set period, many other products only take 'snap shots' of what is going on and can miss 99.9% of the data that is critical to your analysis.
Ideal analysis logger for Energy AuditsThe affordable Electrocorder is the best value solution for carrying out site audits, with great analysis and reporting tools in our free software. Our focus on providing an easy to deploy energy analyzer with built-in equipment management tools helps to make logging as effective as possible. Tamper-proof setup means...
The DC-3VA is specifically designed to accurately monitor one or two DC voltage channels, 1V to 300Vdc and one DC current channel. Current Options:± 10Adc to ± 100Adc± 30Adc to ± 300Adc± 100Adc to ± 1kAdc Environmental Sealing: IP43 or IP65
Wireless IoT data loggers with built-in GSM modem and activated Lifetime Fee built-in IoT SIM card offer connection and sending of measured values to the COMET cloud.The SIM card allows immediate connection of the IoT wireless data logger to the COMET cloud. The prepaid card provides long-term connectivity, including all the necessary functions.
-40...+400°C 16 measuring ranges per device output 0-10 V, 4-20 mA DIP-switch-technology optional with LCD-Display protection type IP65 stainless steel contacting block
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology. Important InformationExternal sensors sold separately. Requires HOBOconnect app and a compatible mobile device or Windows computer.
The HOBO MX1104 multi-channel data logger measures and transmits temperature, relative humidity, and light intensity data wirelessly.It also includes an external analog input to attach a variety of additional sensors.
The JRI MySirius application allows fully customizable management thanks to a dashboard and modules adapted to needs and jobs of the users.The data transmitted by the wireless temperature sensors LoRa® SPY and mini data loggers Nano SPY and are easily overseen or managed on the full-web platform.
Ranges:0 to 285°C (32° to 545°F) 285 to 482°C (545° to 900°F)
- Temperature Data Logger with internal temp. sensor, equipped with Bluetooth wireless technology.- Our dedicated mobile app with automatic refresh allows you to monitor constantly changing data.- Data can also be uploaded to our free cloud service “T&D WebStorage Service”. The mobile app creates PDF reports of specific periods of logged data.PDFs can...