SD-TEMP-SS HOBO Self-Describing 6-foot Stainless Steel Temperature Sensor

SD-TEMP-SS

Onset

New

1.8m Self Describing Stainless Steel HOBO Temperature Sensor.

  • Self-Describing technology for quick, easy setup
  • Locking jack to ensure sensor is connected and stay connected
  • Food-grade stainless-steel temperature probe
  • Measurement range of -40° and 100°C (-40° to 212°F)
  • Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)
  • Available in 1.8 m (6 ft)

100,00 €

Add to wishlist

The Sensor measures: Temperature in food
Cable Length: 1.8 m

For use with HOBO MX1104 and MX1105 multi-channel data loggers, this food-grade stainless-steel temperature sensor offers integrated strain relief, so the probe is secured to the logger.
It features Self-Describing technology to automatically communicate configuration information to the logger, without any programming or extensive user setup.

In what environment does this sensor operate?

This sensor operates in indoor and outdoor environments.

What measurements does this sensor support?

The SD-TEMP-SS-06 sensor supports the following measurements: Soil Temperature and Temperature

Measurement range -40° to 100°C (-40° to 212°F)
Accuracy ±0.15°C from 0° to 50°C (±0.27°F from 32° to 122°F), insert probe 5.08 cm (2 inches) minimum; see Plot A
Resolution 0.002° at 25°C (0.003° at 77°F)
Drift <0.1°C (<0.2°F) per year
Response Time in Air 3 minutes typical to 90% in air moving 1 m/s (2.2 mph)
Response Time in Stirred Water 15 seconds typical to 90%
Probe Diameter 3.2 mm ±0.25 mm (0.12 inches ±0.01 inches)
Probe Length 10.2 cm (4 inches)
Probe Housing Food-grade stainless steel (#316 stainless steel)
Note: The stainless steel probe is waterproof, but the handle is not intended for prolonged use in water or moist environments, especially those with temperatures greater than 30°C (86°F). For more details contact Onset Computer Corporation or an Onset authorized dealer.
Cable Length 1.8 m (6 ft)

30 other products in the same category: