T-CON-ACT-300 ConLab 0-300 Volt AC Transmitter & 4-20mA o/p

T-CON-ACT-300

Magnelab

New

Volume discounts

Quantity Price
You Save
%
1+ 168,00 € 0%
5+ 162,96 € 3%
10+ 157,92 € 6%
15+ 152,88 € 9%

Add to wishlist

Manual:T-CON-ACT-300T-CON-ACT-300 ConLab 0-300 Volt AC input Transmitter & 4-20mA o/p

At AlphaOmega-Electronics you will find the best range of Current Transducerand at the most competitive prices.

"

0-300 volt self-powered transformer for monitoring sine wave, single-phase AC voltage. Requires Input Cable for use with U12 loggers.

Can be plugged directly into the external input jacks of U12 and ZW Family loggers to expand the range of measurement options and applications.

Environment:
The T-CON-ACT-300 Sensor is for use in Indoor environments

Measurements:
The T-CON-ACT-300 Sensor supports the following measurements: AC Voltage

Note: Not currently CE compliant

Ranges: 0–300 volts RMS
Sensor accuracy: < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range)
Over range: +20% of span
Over load: +40% of span
Frequency: 60 Hz AC
Supply: Self-powered
Output: 0–20 mA
Response time to 90%: <240 msec
Operating Conditions: -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing
Housing: Plastic polycarbonate
Protection Level:
Box: According to IP-50 DIN 40050
Terminals: According to IP-10 DIN 40050
Mounting: Standard 35mm DIN rail

Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.

Requirements

For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)

30 other products in the same category: