CDL carbon dioxide sensor

CDLSHTC2

Veris

New

At AlphaOmega-Electronics you will find the best range of carbon dioxide sensorsand at the most competitive prices.

830,00 €

tax excl.

Add to wishlist

CDL carbon dioxide sensors maximize energy savings, while ensuring optimal ventilation. The sensors allow ventilation systems to be controlled by the amount of CO2 present in a space. The CDL Series detect fluctuations in CO2 levels and signal ventilation systems to provide an inlet of fresh air optimal for the space at a given time saving energy and ensuring tenant comfort.

    Series Specifications
  • Input Power 20 to 30VDC/24VAC; 100mA max.
  • Analog Output 4-20mA, (clipped & capped)/0-5VDC/0-10VDC (selectable)
  • Operating Temperature Range 0° to 50°C (32° to 122°F)
  • Housing Material High impact ABS plastic

CO2 Transmitter:

  • Sensor Type Non-dispersive infrared (NDIR), diffusion sampling
  • Measurement Range 0-2000/5000 ppm (programmable)
  • Accuracy ±30 ppm ±2% of measured value*
  • Repeatability ±20 ppm ±1% of measured value
  • Response Time <60 seconds for 90% step change

RH Transmitter: 

  • HS Sensor Fully replaceable, digitally profiled thin-film capacitive (32-bit mathematics) U.S. Patent 5,844,138
  • Accuracy ±2% from 10 to 80% RH; NIST traceable multi-point calibration
  • Stability ±1% @ 20°C (68°F) annually, for two years
  • Operating Humidity Range 0 to 100% RH
  • Operating Temperature Range 10° to 35°C (50° to 95°F)
  • Temperature Coefficient ±0.1% RH/°C above or below 25°C (typical)

Temperature Transmitter:

  • Sensor Type Solid-state, integrated circuit
  • Accuracy ±0.5°C (±1°F) typical
  • Resolution 0.1°C (0.2°F)
  • Range 10° to 35°C (50° to 95°F)

Relay Contacts:

  • 1 Form C (SPDT) (on models without setpoint slider option) 1A@30VDC, resistive; 30W max.
  • Controlling ventilation in response to occupancy
  • Facilitating compliance with ASHRAE 62.1 standard for air quality
  • Office buildings, conference rooms, schools, retail stores, etc.
Accessories
PBR1  Wristwatch barometer for AP4
PCK1  Spare AP4 consumables kit
PSK2  AP4 Spares Kit (incl manual)
PSH1  Spare AP4 sensor head
PSB2  Spare AP4 rechargeable battery v2
PAD  Paper pads for AP4 calibration
AP-CHG  Spare AP4 battery charger
AP-CP  Spare AP4 calibration plate
AP4-UM  AP4 User Manual
USB-RS232  USB to RS232 adapter cable

AP4-Porometer-5

30 other products in the same category: