Duotrak is officially included in the NRPP (National Radon Proficiency Program) list. Radonova is proud of this achievement and thus becomes a product that follows the measurement standards established by ANSI-AARST (American Association of Radon Scientists and Technologists) and is accepted to carry out radon measurements. Duotrak® provides a simple method of separating radon exposure during working hours from exposure outside working hours.
This product is no longer in stock
|Type of Instrument||Air Quality Analyzer|
|The instrument measures:||Radon|
Duotrak® offers you a simple way to separate radon exposure measurements made during working hours from non-working hours at the work place and can play an important role in your health and safety at work standards.
The detector is normally used as a follow up measurement after a long-term measurement has indicated elevated radon levels are present and where a follow up is needed to specifically check the radon level during working hours. The instrument is very user-friendly and there is no need of external consultant to use the device at the work place.
The exceptionally large range of this detector allows you to measure radon levels from as low as 60 Bq/m3 to as high as 150,000 Bq/m3 during a 3-week period with very high accuracy. The measurement is accredited and complies with ISO 17025 and ISO 11665-4:2012.
Minimum 2 detectors must be ordered.
Control of radon exposure in the workplace is a requirement of the EURATOM BSS 59/2013 Directive. This document establishes a reference level of 300 Bq m-3. Radon levels can fluctuate quite a bit over 24-hour periods, and therefore radon concentrations can be different within and outside of business hours.
Radonova has developed the Duotrak product which provides a simple method of separating radon exposure during working hours from exposure outside working hours. This product is officially included in the NRPP (National Radon Proficiency Program) list
Duotrak® is an alpha track detector used for radon exposure measurement anywhere between 3 weeks and 3 months.
The detector has a manual two position setting (ON / OFF) giving you the control to select exposure measurement during working hours when personnel are present and potentially exposed to radon. By switching you can exclude non-working hours when no personnel are present.
The detector consists of two film elements located within a pod made from a special antistatic plastic which allows radon gas to enter by diffusion. Analysis is performed using a state-of-the-art image scanner and the exposure results are expressed in terms of Bq/m3.
Place the Duotrak® detectors according to the sampling instructions that accompany the package.
Fill in information about the measurement: start date, detector number and location. To complete the measurement, you should log in again and register the stop date and amount of time the detector has been operating in the ‘ON’ position.
When we receive the exposed Duotrak® detectors from you we analyse them immediately, putting the results as an online report into your account which you can print as a hard copy as part of your health and safety at work action file.
You can always contact us directly by Email or Phone.
1 085,00 €
1 085,00 €
1 085,00 €
1 085,00 €