Catalog
Loading...
fuentes RSS
No RSS feed added
The Type "K" connector sensor cable allows deformation, without worrying about the risk of breakage or cracking.Includes K-Type Mini-Connector
Inter-unit Communication Optical, Short Range Wireless Data Transfer 4G Communication Unit - PC USB Note: The RTR500B series is the new generation model of our RTR-500 series.
T&D Corporation is proudly releasing the "Thermo Recorder TR75A", a new lineup of our TR7A Series data loggers. The TR75A supports 6 types of thermocouple (K, J, T, E, S, R), and has the same auto-upload to cloud function as the existing TR-75wb, plus a new array of features and functions. These new features are particularly useful for temperature...
This is a Battery powered Data Logger with an internal atmospheric pressure sensor and allows for an external CO2 probe up to 10 000ppm.Included in delivery:- U2422- Instruction Manual- Traceable Calibration Certificate- Rechargeable Battery- Power Supply- USB-C Cable- FREE Analytical Software COMET Vision New CO2 probe for data logger: SN274...
DISCONTINUED CO2 concentration sensor for Datalogger U2422 or Multilogger M1440. CO2 Sensor Probe for connection to a 1, 2 or 4 meter extension cable that must be ordered separately.
A Spectrally "Flat C" Pyranometer according to ISO 9060:2018 for ordinary solar efficiency monitoring of PV systems. "SMALL - LIGHT - COMPACT"
► Spectrally Flat Class B (First Class) pyranometer according to ISO 9060:2018.► The LPPYRA02 are well suited for the measurement of incoming global solar radiation (0.3μm…3μm spectral range).► Complete with: shade disk, sachet with silica-gel crystals, 2 cartridges, levelling device and calibration report.
► High acccuracy of measurements► Excellent characteristics► Waterproof enclosure made of anodized aluminium with IP67► Output signal 0-5V or digital SDI-12 and Low power consumption MODEL SSR1D DISCONTINUED
High accuracy±1% from 10% to 100% of rated currentUL Recognized1V or 0.333V1V or 0.333Vac output versions available
This Ambient temperature, relative humidity, atmospheric pressure t-line Web sensor, has remote alarm facility. Processing and analysis of measured data: ► Online in COMET Cloud ► COMET Database software ► Integration into 3-party systems Warranty: 3 years
Certification: CE-EMC, CE-LVD, RoHS, ISO9001
Rotary actuator with fail-safe position for adjusting dampers in HVAC installations Running time: 3...5 s / 90° Torque: 15 Nm Nominal voltage: 24 VAC/DC Control: continuous control (0)2...10 VDC Damper size: up to approx. 3 m² Shaft coupling: clamp square 8-15 mm / round 8-20 mm
Surface temperature transducer.The NTC10KSUP is a surface temperature transducer made up by a 30x30x6mm aluminium plate provided with two holes for an easy fix. May be interfaced with:All WineCap™ product line dataloggers with NTC10KΩ BETA 3977 transducer input (WSDxx-xx10KB1/SDxx-xx10KB1)All WineCap™ product line probes withNTC10KΩ BETA 3977 transducer...
Temperature Transducer.: PT 1000 class "A" The PT1000CNT is a temperature transducer to acquire surface temperatures.The class “A” PT1000 sensible element is made by a brass block, meanwhile the cable insulation is realized in poly-propylene for the conductor an in thermoplastic rubber (TPE) for the secondary insulation.
3 channels Wireless Smart Datalogger- Interface module provided with 3 inputs for wind speed, direction and solar radiation- Type "C" lithium internal battery for a battery life up to 5 years with samples every 10 minutes- IP 65 sealing (to be used with AN6410 and ANS-RSG-B transducers).
Certification: CE-EMC, CE-LVD, RoHS, ISO9001 AO-600-07 Data Logger includes Data Acquisition, storage, transmission and management, and many other functions.
AO-WDS2DVSE Ultrasonic Anemometer for Davis VP 2 CE Approved
Two wires class "A" PT1000 for cryogenic use► Stainless steel finger Ø 6x50 mm► Complete with 2 meters teflon shielded cable► Operating temperature -200÷150°C.
Turn any analog sensor into an SDI-12 compliant sensor using the SDI-12 Sensor Translator.This small but powerful device will sample any analog, or one wire sensor and interface it to the SDI-12 bus.It handles all of the complex SDI-12 protocols, it is simple to use, and is inexpensive to implement in production units.
Replace your expensive data logger, and turn your PC into an affordable SDI data logger with the SDI-12 to USB Protocol Translator board.Plug in the board into a USB port, open Windows HyperTerminal, and you are ready to query SDI-12 compliant sensors.