MS-7200 Portable Mechatronics Training System (for PLC-200)

1. Its portable size makes it easy to carry out experiments on lab table.
2. Using 4mm safety plugs and sockets for terminal interconnections of devices to ensure the physical safety of users.
3. The status of input and output signals is monitored and displayed on nearby status LED.
4. Colorful I/O sockets to represent different port function - yellow sockets for signal input, blue sockets for signal output, red socket for DC power input, black socket for DC power ground.
5. External interface supports extensions which are particularly suitable for PLC-200.
 

MS-7001 Automatic Sorting Robot Features:

1. Suitable for PLC beginners
2. Systematic training for trainees
3. Abundant experimental practices
    a. Six basic practices (experiment 1 - 6) for learning basic PLC instructions
    b. Six advanced practices (experiment 7-12) for upgrading the PLC programming capability.
4. Widespread control applications:
DC motor control, various sensors, pneumatic cylinder control, position control and detection for sliding table, PLC wiring practice.
 
 
MS-7002  Linear Positioner Features:
 
1. Using stepper motor to drive a sliding mechanism.
2. Diverse applications for servo control.
3. Combining BCD toggle switches and a 7-segment LED in the trainer.
4. Providing a limit switch to avoid over-movement of the sliding guide

 MS-7001 Automatic Sorting Robot

  1. Conveyer belt position control
  2. Workpiece detecting and sorting
  3. Z-Axis cylinder up/down control
  4. Rotary cylinder right/left control
  5. Vacuum generator control
  6. Slide table position control
  7. 3-Axis pick & place robot control
  8. Picking and placing on conveyer belt
  9. Storing Work pieces sequentially
 10. Workpiece sorting and storing control
 11. Conveyer loading control
 12. Automatic loading-unloading control
 
 
 
MS-7002 Linear Positioner
 
  1. Linear motion control
  2. Open-loop position control
  3. Vibration and torque control
  4. Positioning time and speed control
  5. Closed-loop position control
  6. Linear acceleration-deceleration control
  7. Positioning with thumbwheel and 7-segment display
  8. Teaching single-position control
  9. Multi-speed control
 10. Multi-position control

Optional but Neccesary:

1. PLC-200 Trainer :
• PLC main unit : SIEMENS SIMATIC S7-224
• Digital input : 14
• Digital output : 10
2. USB / PPI Multi - Master
3. STEP 7- Micro / WIN Software CD

With MS-7001:

1. 6mm Pneumatic Tube
2. Workpiece : Three kinds of workpiece
3. Connection Leads x 1 set
4. 40-pin Flat Cable x 1 pce
5. Experiment Manual

With MS-7002:

1. Connection Leads 1 set
2. 40-pin Flat Cable x 1 pce
3. Experiment Manual

OPTIONS NECESSARY FOR THIS SYSTEM:
1. Air Compressor
   -  Air tank: 25L ± 10%
   -  Max. Pressure: 10kg/cm
   -  Flow rate: 90 L/min ± 10%
2. PLC-200 Trainer
3. USB/PPI Multi - Master
4. STEP 7- Micro/WIN Software CD

PLC-200 Trainer:
• PLC main unit: SIEMENS SIMATIC S7-224
• Digital input: 14
• Digital output: 10
2. USB/PPI Multi - Master
3. STEP 7- Micro/WIN Software CD

MS-7200 PORTABLE MECHATRONICS TRAINING SYSTEM (FOR PLC-200) INCLUDES:
MS-7001 AUTOMATIC SORTING ROBOT: 1 PIECE
MS-7002 LINEAR POSITIONER: 1 PIECE
PLC-200 PROGRAMMABLE LOGIC CONTROLLER: 2 PIECES
STEP 7- MICRO/WIN SOFTWARE CD: 2 PIECES
USB / PPI MULTI-MASTER CABLE: 2 PIECES

PREPARE LOCALLY WHEN OPERATING WITH MS‐7200:
► PC/ LAPTOP X 2 PIECES
► AIR COMPRESSOR