E30E236 Advanced Monitoring Ethernet route of Tension, Current, Power and Energy for 40 circuits

E30E236

Veris

New

Volume discounts

Quantity Price
You Save
%
1+ 3 978,00 € 0%
5+ 3 898,45 € 1.9997%
10+ 3 820,45 € 3.9605%
15+ 3 744,00 € 5.8824%

3 978,00 €

Add to wishlist

The E30E Series ethernet-enabled Solid-Core Panelboard Monitoring System provides a cost effective solution for electrical load management, making it ideally suited for applications where loads are dynamic, such as the data storage industry, lighting panels, etc.

The E30E224 kit with Advanced functionality monitors voltage, current, power and energy consumption for mains and branches in a panelboard. The accumulated information can be accessed via an ethernet or serial communications interfaces using Modbus,BACnet or SNMP protocols.  As any circuit approaches the user-configured thresholds, alarm indicators are triggered, preventing costly downtime from overloaded circuits or failed loads.

The E30E224 kit includes an Advanced measurement unit with metal housing, two strips of 12 ea 100A solid core current transducers spaced 18 mm apart and two 4 ft round ribbon cables for connecting the CT strips to the main board. Both flat and round ribbon cables in various lengths are available for use with this product to fulfill your application needs (see CBL). CTs for monitoring mains and neutrals are sold separately (see H681x-xxxA-.3V, E681xxxxxx, E682xxxxxx).

APPLICATIONS

  • Data center energy management
  • Overload protection and infrastructure management
  • Subtenant billing
  • Load based cost allocation
  • Load management
  • Load balancing
  • Lighting circuit monitoring

FEATURES

  • A compact solution for panelboard monitoring
  • ANSI & IEC Class 1 metering system accuracy (1%, including branch CTs)
  • Built-in ethernet and serial communication with Modbus, BACnet, & SNMP protocols
  • Versatile support for any combination of 1, 2, 3 pole breakers
  • Phase angle measurements of every current and voltage input
  • Energy snapshots and demand measurements
  • Signed Power factor to indicate leading or lagging current
  • Reports voltage, current, power and energy for mains and branches...one product covers the whole panelboard
  • Monitors up to 28 circuits (24 branch circuits, one 3-phase main, one neutral) with one device...saves space
  • 18 mm spaced solid-core 100 A current sensors…flexible installation
  • 4 user-configurable alarm thresholds and individual monitoring of all branches...improved load management
  • Built-in ability to set the orientation and numbering of the circuits
  • 50mA to 100A monitoring...widest dynamic range in the industry
  • Flexible installation options - can use ribbon cables from 18” (0.46 m to 20 ft (6 m)

Inputs:

  • Measurement Input Voltage 90-277 VAC, 50/60 Hz
  • Control Power Voltage 100-277 VAC, 50/60 Hz

Accuracy:

  • Power/Energy IEC 62053-21 Class 1, ANSI C12.1-2008 (1% system accuracy, including branch CTs)
  • Voltage ±0.5% of reading 90-277 V line-to-neutral

Operation:

  • Sampling Frequency 2560 Hz
  • Update Rate Modbus: 1.8 s, BACnet: 7 s, SNMP: 10 s
  • Overload Capability 22 kAIC

Network Communications:

  • Physical Interface 10/100 Mbit Ethernet
  • Protocols supported Modbus TCP, BACnet IP, SNMP

Serial Communications:

  • Physical Interface 2-wire RS-485
  • Protocols supported Modbus RTU, BACnet MS/TP
  • Address 1
  • Baud Rate selectable 9600, 19200, 38400
  • Parity selectable NONE, ODD, EVEN
  • Communication Format 8 data-bits, 1 start-bit, 1 stop-bit

Mechanical:

  • Ribbon Cable Support 2 ea 4 ft. (0.9 m) round ribbon cables ship standard; up to 20 ft. (6 m) available

Environmental:

  • Operating Temperature 0° to 60°C (32° to 140°F) (<95% RH noncondensing)
  • Storage Temperature -40° to 70°C (-40° to 158°F)

Safety:

  • UL508, EN61010-1

30 other products in the same category: