VV1 Precision Wind Speed (Out: 4÷20mA)

Nesa srl


Precision Wind Speed Sensor Anemometer

Add to wishlist

The Sensor measures: Air Speed m/sec
Output Signal: Multiple analog outputs

'First Class' sensor to measure wind speed at low energy consumption also available in a heated version (model VV1R), compact and robust, made of anodized aluminum alloy to protect against oxidizing agents.

Extremely linear and precise, with high dynamic response even in strong gusts of wind, easy to interface with any data logger.
The sensor uses specific arrangements, including special self-lubricating bearings, which enable MEASNET certification and make it ideal for wind (wind energy) monitoring applications, ensuring maximum performance.
The sensor is equipped with electrical protections and is available with various signal outputs.

• Measurement of wind speed with very high precision (<0.1 m/s)

• Calibrations: wind tunnels MeasNet and ACCREDIA

• Classification according to IEC 61400-12-1 and 'First Class' , Class A 1.96, Class B 3.05 Class S 2:42

• Instrument according to standard WMO

• Rotor with high performance ball bearing (MIL-L-6085 C)

• Low power consumption (<0.1W; <5W@12VDC with heater)

• Typical measuring range: 0.28 to 50m/s (0 ...150 Hz) up to 100m/s

• Linearity: R> 0.99998 with a standard error of <0.02 m/s

• Output signal: pulses (150Hz), 4-20mA, 0÷2Vdc or digital RS485/Modbus

• Operating conditions: -10 ÷ +70° C, heated version -35 ÷ +70°C, 0 to 100m/s (burst)

• Power supply: 10 ÷ 30Vdc 

30 other products in the same category: