View larger

T-VER-E50B2 HOBO-Veris Power & Energy Meter

Reference T-VER-E50B2

Manufacturer: Onset

Condition: New

More info about this product.

Share on Facebook!
Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Overview
Specifications
Download
Accessories

T-VER-E50B2 MANUAL Download (626.07k)

The H22-001 Energy...

H22-001 HOBO Energy & HVAC Data Logger (15 Channels)
430,00 €

Add to cart
HOBO Weather Station...

U30-NRC HOBO USB Weather Station
665,00 €

Add to cart
T-MAG-0400 AC-Current Sensors

Add to cart
Monitor / Logger HOBO...

H22-001-C HOBO Monitor for Weather & Energy (15 channels)
550,00 €

Add to cart
Data Logger HOBO

UX120-017 4 Channel Pulse/Event, State & Run-Time Data Logger
240,00 €

Add to cart
T-ACT AC-Current Transducers Accu from CCSfrom 20 to 250 Amps

Add to cart
BUYING IN BULK, OR...

CASE-PELICAN-1510 Pelican Case for Instruments and Loggers
371,00 €

Add to cart
Single Phase Fuse Kit

T-VER-AH02 Single Phase Fuse Kit
170,00 €

Add to cart

The E50B2 Power & Energy Meter combines exceptional performance and easy installation to deliver a cost-effective solution for power and energy monitoring needs. The T-VER-E50B2 can be installed on standard DIN rail or surface mounted as needed. It works with the HOBO UX, U30, ZW, H22 & H21 data loggers.

Features:

Measures Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more.
Range: 90-600VAC – Wye or Delta configurations
Accuracy: ANSI 12.20 0.5% accuracy, IEC 62053-22 Class 0.5S
Compatible with CTs from 5 to 32000A (333mV output)
Bright backlit LCD
UL listed, CE, California CSI Solar, ANSI C12.20

Environment:

The T-VER-E50B2 Sensor is for use in Indoor environments

Measurements:

The T-VER-E50B2 Sensor supports the following measurements : AC Current, AC Voltage, Amp Hour (Ah), Amps (A), Kilowatt Hours (kWh), Kilowatts (kW), Power Factor (PF), Volt-Amp Reactive (VAR), Volt-Amp Reactive Hour (VARh), Volt-Amps (VA), Volts (V), Watt Hours (Wh), Watts (W)

Other models available (prices may be different):

E50B1	DIN Energy Meter, VAR Pulse Out
E50C2	DIN Energy Meter, Modbus, Pulse Out
E50C3	DIN Energy Meter, Modbus, Logging, Pulse Out
E50H5	DIN Energy Meter, BACnet, Logging, Pulse In
E51C2	Bi-Directional DIN Energy Meter, Modbus, Pulse Out
E51C3	Bi-Directional DIN Energy Meter, Modbus, Logging, Pulse Out

Build better energy efficiency and power management with the E50B2 Power & Energy Meter. This cost-effective sensor is simple to deploy and can either be installed on standard DIN rail or be surface mounted. The E50B2 integrates with HOBO UX, U30, ZW, H22, and H21 data loggers.

Measures Power Factor (PF), Reactive Power (VAR), Watt Hours (Wh) and more.
Range: 90-600VAC – Wye or Delta configurations
Accuracy: ANSI 12.20 0.5% accuracy, IEC 62053-22 Class 0.5S
Compatible with CTs from 5 to 32000A (333mV output)
Bright backlit LCD
UL listed, CE, California CSI Solar, ANSI C12.20

Environment:
The T-VER-E50B2 Sensor is for use in Indoor environments

Measurements:
The T-VER-E50B2 Sensor supports the following measurements:

AC Current, AC Voltage, Amp Hour (Ah), Amps (A), Kilowatt Hours (kWh), Kilowatts (kW)

Hobo Data Loggers - Onset Computer Corporation

Measurement Accuracy:
Real Power and Energy	IEC 62053-22 Class 0.5S, ANSI C12.20 0.5%
Reactive Power and Energy	IEC 62053-23 Class 2, 2%
Current	0.4% (+0.015% per °C deviation from 25°C) from 5% to 100% of range; 0.8% (+0.015% per °C deviation from 25°C) from 1% to 5% of range
Voltage	0.4% (+0.015% per °C deviation from 25°C) from 90V (L-N) to 600VAC (LL)
Sample Rate	2520 samples per second
Data Update Rate	1 sec
Type of Measurements	True RMS up to the 21st harmonic 60 Hz, One to three phase AC system
Input Voltage Characteristics:
Measured AC Voltage	Minimum 90VL-N (156VL-L) for stated accuracy UL Maximums: 600VL-L (347VL-N) CE Maximums: 300VL-N (520V L-L)
Metering Over Range	+20%
Impedance	2.5 MΩ (L-N)/5 MΩ (L-L)
Frequency Range	45 to 65 Hz
Input Current Characteristics:
CT Scaling	Primary: Adjustable from 5 A to 32,000 A
Measurement Input Range	0 to 0.333VAC or 0 to 1.0VAC (+20% over-range)
Impedance	10.6kΩ (1/3 V mode) or 32.1kΩ (1 V mode)
Output:
Alarm Contacts	N.C., static output (30VAC/DC, 100mA max. @ 25°C, derate 0.56mA per °C above 25°C)
Real/Reactive Energy Pulse Contacts	N.O., static output (30VAC/DC, 100mA max. @ 25°C, derate 0.56mA per °C above 25°C)
Mechanical Characteristics:
Weight	0.62 lb (0.28 kg)
IP Degree of Protection (IEC 60529)	IP40 front display; IP20 Meter
Display Characteristics	Back-lit blue LCD
Terminal Block Screw Torque	0.37 ft•lb (0.5 N•m) nominal/0.44 ft-lb (0.6 N•m) max
Terminal Block Wire Size	26 to 14 AWG (0.13 to 2.08 mm2)
Rail	T35 (35mm) DIN Rail per EN50022
Environmental Conditions:
Operating Temperature	Meter: -30° to 70°C; Display: 0° to 50°C
Storage Temperature	Meter: -40° to 85°C; Display: -10° to 60°C
Humidity Range	<95% RH (non-condensing)
Altitude of Operation	3 km max.
Metering Category:
North America	CAT III; for distribution systems up to 347 V L-N/600VAC L-L
CE	CAT III; for distribution systems up to 300 V L-N
Dielectric Withstand	Per UL 508, EN61010
Conducted and Radiated Emissions	FCC part 15 Class B, EN55011/EN61000 Class B (residential and light industrial)
Conducted and Radiated Immunity	EN61000 Class A (heavy industrial)
Safety:
North America (cULus)	UL508 (open type device)/CSA 22.2 No. 14-05
Europe (CE)	EN61010-1:2001

T-VER-E50B2 HOBO-Veris Power & Energy Meter

30 other products in the same category: