S-SMD-M005 Soil Moisture HOBO Smart Sensor 10HS View larger

S-SMD-M005 Soil Moisture HOBO Smart Sensor 10HS




Soil Moisture Smart Sensor

274,00 €

Add to wishlist

ADC Bits 12 bit
The Sensor measures: Soil Humidity
Output Signal: HOBO Smart Sensor
Cable Length: 5 meters
Sensor for use in: Outdoor

S-SMD-M005 - 10HS Soil Moisture Smart Sensor
Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with soil-specific calibration. The 10cm probes measure soil moisture over a larger volume of soil which helps to average out any soil variability. Readings are provided directly in volumetric water content. This sensor's high frequency design gives it a low sensitivity to salinity and textural effects and a wide measurement range.

The S-SMD-M005 Sensor is for use in Outdoor environments

The S-SMD-M005 Sensor supports the following measurements: Soil Moisture

Measurement Range:
In soil: 0 to 0.570 m³/m³ (volumetric water content)

Accuracy: ±0.033 m³/m³ (±3.3%) typical 0 to +50°C (+32° to +122°F) for mineral soils up to 10 dS/m
±0.020 m³/m³ (±2%) with soil specific calibration

Resolution: 0.0008 m³/m³ (0.08%)

Soil Probe Dimensions: 160 x 32 x 2 mm (6.5 x 1.25 x 0.08 in.)

Weight: 190 grams (6.7 oz)

Decagon Probe Part No.: 10HS

Sensor Operating Temperature:
0° to +50°C (+32° to +122°F). Although the sensor probe and cable can safely operate at below-freezing temperatures (to -40°C/F) and the smart sensor tube (the white portion of the sensor cable that houses the electronics) can be exposed to temperatures up to +70°C (+158°F), the soil moisture data collected at these extreme temperatures is outside of the sensor's accurate measurement range. Extended temperatures above +50°C (+122°F) will decrease logger battery life when using for the S-SMD-M005 smart sensor.

Volume of Influence: 1 liter (33.8 oz)

Sensor Frequency: 70 MHz

Bits per Sample: 12

Number of Data Channels: 1

Measurement Averaging Option: No

Cable Length Available: 5 m (16 ft)

Length of Smart Sensor Network Cable: 0.5 m (1.6 ft)

Description: ce - The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

30 other products in the same category: