► DS9490B is a USB bridge plus holder for a single F5-size iButton.► The iButton is securely held behind a latched door.► The DS9490B adapter is based on the DS2490 USB to 1-Wire bridge chip.
ATEX certified relative humidity temperature transmitter. Outdoor, indoor use. ATEX certification for use in potentially explosive environments.
- NEW lower cost soil sensor kit for portable use- Instant measurements of moisture, EC, and temperature- Comes complete with readout meter and case
Sensor readings on your SmartPhone ZSC Bluetooth SIS - Sensor Interface - stereo
RS1 Solar Radiation Shield Mechanical specifications Dimensions: 210 x 260 x 230mm Weight: 1.6 Kg
These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.
TR71A2 - 2 Ch. Temperature, Wireless LAN, Bluetooth TR72A2 - Temp. + Humidity, Wireless LAN, Bluetooth TR72A2-S - T+H, Wide Range, Wireless LAN, Bluetooth TR75A2 - 2 Ch. Thermocouple, Wireless LAN, Bluetooth
- Rated input: 100A,600A,1kA,3kA,6kA(only choice one point,accept OEM)- Rated output: 5A rms- Accuracy: ±0.5% (from 1% to 100% of rated )- Bandwidth: 30Hz to 5KHz- Power supply: 24VDC- Maximum Burden: 0.8Ω- Maximum power: 15W- Requires Rogowski Coils (not included)
YH1200 haze meter is designed to measure transmittance and haze testing.
Portable multi-function power analyzer with 5 rated current ranges: 100A, 600A, 1kA, 3kA, 6kA for use with Rogowski coils.
Detachable Leaf-ClipsSupplementary detachable leaf-clips for use with the FluorPenFP 110/D and the PAR-FluorPenFP 110/D.10-piece set.
The SQ-512 is an amplified full-spectrum quantum sensor with a 0 to 2.5 V output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser, and high-quality cable terminating in pre-tinned pigtail leads for easy connection to...
The SQ-500 is a self-powered, analog full-spectrum quantum sensor with a 0 to 40 mV output. The sensor incorporates a blue-enhanced silicon photodiode and custom optical filters with a rugged, self-cleaning sensor housing design, anodized aluminum body with acrylic diffuser, and high-quality cable terminating in pre-tinned pigtail leads for easy...
The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor dip effect correction factor to meter readings via firmware. The meter provides excellent measurements on all light sources, including LEDs.
10-14 Mhz color doppler wireless linear probe C10CS APPLICATIONS:Abdomen, Obstetrics/Gynecology, Cariac, Kidney, Urology, Breast, Thyroid, MSK, Vascular, Pediatrics, Carotid, temporomandibular articulation, etc.
DLI-400, DLI-500, & DLI-600 PAR, Daily Light Integral, and Photoperiod Meter. These Apogee DLI meters are a rugged, simple-to-use devices for spot checking PAR or ePAR levels while automatically recording the daily light integral and hours of light (photoperiod) for up to 99 days.
PlantPen/N-Pen N 110 is a light-weight, battery-powered reflectance-based instrument that provides a convenient, cost-effective method for effective nitrogen management in plants throughout their growing season. Essentially, the N-Pen characterizes nitrogen amount by means of reflectance and by the concept of a close link between chlorophyll content and...
Self-Describing technology for quick, easy setup of the data logger Locking jack to ensure sensor is connected and stays connected Measurement range of -40° and 100°C (-40° to 212°F) Accuracy of ±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F) Available in lengths of 0.3 m (1 ft), 1.8 m (6 ft), 6.1 m, (20 ft) & 15.2 m (50 ft)
Stainless Steel Perimeter Bands for mounting DB20 Perimeter Dendrometers in the field.
Sensor-Datalogger cable, terminated with end sleeves on Datalogger side and 7 pole IP68 connector on sensor side. 10m lenght.
The LAQUAtwin 4M kit includes: NA11, K11, NO311, CA11, in carrying case (1300077785) with batteries, wash bottle, 2pipettes, manual and calibration solutions
The HOBO MX1105 multi-channel data logger, with four-channel inputs, measures and transmits data wirelessly from a variety of sensors to your mobile device via Bluetooth Low Energy (BLE) technology. Important InformationExternal sensors sold separately. Requires HOBOconnect app and a compatible mobile device or Windows computer.