◆ This trainer, built on a Fiat chassis, features a 4-stroke, 4-cylinder in-line diesel engine and a 5-speed gearbox with reverse. It includes a rear-wheel drive system, a single-plate clutch with a diaphragm, and a propeller shaft with mechanical and flexible joints.
◆ Fiat front-drive chassis with a 1200 cm³, 4-cylinder petrol engine, MPI injection, ABS-equipped brake system with 4 sensors, and hydraulic power steering.
◆ Fully functional educational tool designed to demonstrate and analyze the Anti-lock Braking System (ABS) and Anti-Slip Regulation (ASR) braking systems structure and operation.
◆ Fully operational EPS system integrated with a functional McPherson suspension. This trainer enables precise simulation of vehicle speed (0-120 km/h), adjustment of steering effort directly on the rack, and alternator simulation.
■ Model: TL-5955 (2/3AA)■ Voltage: 3.6V, Capacity: 1650mAh■ Size: 1.4cm x 3.35cm (0.571" x 1.319")■ Chemistry: Lithium Thionyl Chloride (Li-SOCI2)■ Nature: Non-rechargeable disposable lithium battery
Nominal voltage: 3.6 Volts DCReusability: Yes. RechargeableAmperage: 2 AmpsmAh capacity: 1100 Milliamp hours (mAh)Weight: 18 Grams
Certification: CE-EMC, CE-LVD, RoHS, ISO9001
◆ RK500-26 BOD sensor is based on ultraviolet method and compensates the attenuation of optical path through specific algorithm. It can eliminate the interference of particulate suspended matter impurities in the measurement results to a certain extent, making the measurement results more stable and reliable.
◆ The RK500-25 COD sensor adopts two light sources, one is ultraviolet light for measuring COD content in water and the other is reference light for measuring turbidity in water. The optical path attenuation is compensated by a specific algorithm, which can eliminate the interference of particulate suspended matter impurities on the measurement results to...
◆ The Chemical Oxygen Demand (COD) analyzer connects directly via the RS485 communication interface, providing simple, reliable and cost-effective process data with remote monitoring, calibration, configuration and diagnostic capabilities.
◆ The Biochemical Oxygen Demand (BOD) analyzer connects directly via the RS485 communication interface, providing simple, reliable and cost-effective process data with remote monitoring, calibration, configuration and diagnostic capabilities.
◆ Fast response Spectrally Flat Class A pyranometer with integrated heater, tilt sensor and diagnostic features.
This Abbe refractometer was made specifically for liquid samples. It contains the Brechung Index, the BRIX scale and the D-line (589nm) as a light source. Calibration can be done with distilled water.
◆ Benchtop instrument that tests the melt flow rate (MFR) of a wide range of thermoplastic raw materials, in the form of pellets, film strips, etc.
◆ Salt-meter (Conductivity method). ◆ The PAL-SALT Meter is widely used in various industries for industrial and food solutions.
The Multiparameter U-50 series is a field-capable water quality checker that consolidates various sensors into a single probe, allowing for simultaneous measurement of up to 11 parameters in a single test.The design of the instrument takes into consideration ease of use in field measurements, and it is equipped with diverse functions and capabilities.It...
WatchDog Ultrasonic Portable Wind Sensor measures and records Wind & Speed Direction.
The 3415SXSE LightScout Solar/Electric Quantum (PAR) Meter includes an external sensor.
Apogee Instruments model AM-220 mounting bracket is recommended for mounting the sensor to a cross arm or pole.It allows the adjustment of the angle of the sensor with respect to the target and accommodates the radiation shield designed for all Apogee MI series infrared radiometers.
The High Voltage Battery Training System is a compact, interactive training unit designed for teaching high-voltage battery management and diagnostics, using components from the Toyota Prius II OEM model.
This device was developed as a readout device for various IMKO probes.Only dedicated probes may be connected to this device.The connection of a probe not intended for this purpose can lead to the destruction of this device and / or the connected probe.