S-UCC-M006 Sensor de pulsos hasta 120 Hz View larger

S-UCC-M006 Sensor de pulsos hasta 120 Hz

S-UCC-M006

Onset

New

Sensor de pulsos

105,00 €

Imposto Excluido

O Sensor mede: Pulsos 120 Hz
Sinal de Saída: Smart HOBO Sensor
Comprimento do Cabo: 1,8 m
Sensor para uso em: Ao ar livre

Al Adaptador de Pulsos Electronicos se le pueden conectar sensores con salidas de pulsos para disponer de conexion inteligente a Registradores HOBO con entradas Inteligentes. This Smart Sensor is compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second).

Longitud del cable de 6m

Características:

  • Adaptador Plug-n-play para los sensores con salida de pulso.
  • Reconocido automáticamente por el H21-USB HOBO Energy Logger.
  • Cable con longitud de 6m (cables disponibles en diferentes tamaños).

Maximum Input Frequency: 120 Hz (120 pulses per second)

Measurement Range: 0 – 65,533 pulses per logging interval

Resolution: 1 pulse

Lockout time: 45 µs ± 10%

Recommended Input Type: Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)

Preferred Switch State: Active low input Normally open

Edge Detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)

Minimum Pulse Width: 1 ms

Input/Output Impedance: 100 KΩ

Open Circuit Input Voltage: 3.3 V

Maximum Input Voltage: 3.6 V

User Connection: 24 AWG wires, 2 leads: white(+), black(-)

Operating Temperature Range: -40° to 75°C (-40° to 167°F)

Overall Cable Length: 6.5 m (21 ft.)

Housing: Weatherproof PVC housing protects input adapter electronics

Housing Dimensions: 14 x 0.95 cm (5.5 x 0.375 in.)

Weight: 310 g (11 oz.)

Bits per Sample 16

Number of Data Channels: 1

30 other products in the same category: