Hawkeye H721 Transductor de Corriente AC (salida 4-20mA)

Veris

Nuevo

Transductor de Núcleo sólido. (no se abre para introducir el cable).
Rango de amperaje seleccionable:
H721LC: 0 - 10/20/40A
H721HC: 0 - 50/100/200A

Salida analógica: 4-20 mA, alimentado por @12-30VDC externa

Pedido mínimo: 2 unidades

El Sensor mide: Corriente AC
Señal de Salida: 4-20 mA
Alimentación: 12 - 30 Vdc
Sensor para uso en: Interior
Los modelos Hawkeye H721HC y H721LC proporcionan información de tendencias de consumo precisas, proporcinando una señal de salida 4-20mA proporcional al consumo.

Existen tres modelos, cada uno con tres opciones de rango de amperaje, con selección por interruptor sin necesidad de puentes.
Elegir Modelo y rango:
H721LC: 0 - 10/20/40A
H721HC: 0 - 50/100/200A
Requiere Alimentación Externa para el bucle de 4-20mA del Sensor: 30mA (max)@12-30VDC
Aplicaciones: 
  • Load trending
  • Motor control
  • Fan/Pump Status

    Loop powered analog current sensor simplifies installation

      • Power the sensor, and receive the signal with only two wires...lower cabling and commissioning costs than with traditional 3-wire sensors
      • Self-gripping split-core for fast retrofit installation...no need to remove conductor

    Selectable factory calibrated ranges for increased flexibility and resolution

    • Factory calibrated switch-selectable ranges for high resolution and installation ease
    • Three field-selectable ranges per unit...fewer versions to choose from, stock, and install
    • Bracket can be installed in three different configurations...added flexibility
    • 100% solid state, no moving parts to fail
    • 5-year limited warranty

Especificaciones:

  • Requiere Alimentación Externa para el bucle de 4-20mA del Sensor: 30mA (max)@12-30VDC
  • Insulation Class 600VAC rms (UL), 300VAC RMS (CE)
  • Frequency 50/60Hz
  • Temperature Range -15° to 60°C (5° to 140°F)
  • Humidity Range 10-90% RH, non-condensing
  • Accuracy ±2%FS from 10% - 100% of selected range, but not less than ±0.4A
  • Response Time 2 sec.
  • Terminal Block Maximum Wire Size 14 AWG
  • Terminal Block Torque (nominal) 4 in-lbs (0.45 N-m)
  • Agency Approvals UL 508 open device listing CE: EN61010-1:2001-2, CAT III, deg. 2, basic insulation.