PyroMiniBus Multicanal Sistema Infrarrojo de Monitorización de Temperatura
AlphaOmega-Electronics dispone de los mejores Registradores de Datos para Temperatura y a los mejores precios.
Temperature Range: -20°C to 1000°C
Interface: RS485 Modbus RTU
Accuracy: ±1% of reading or ±1ºC whichever is greater
Repeatability: ± 0.5% of reading or ± 0.5°C whichever is greater
Emissivity: 0.2 to 1.0
Response Time, t90: 240 ms (90% response)
Spectral Range: 8 to 14 μm
Supply Voltage: 6 to 28 V DC
Supply Current: 50 mA max.
Baud Rate: 9600 baud (other configurations available upon request)
Modbus Data Format: 8 data bits, no parity, 1 stop bit (other configurations available upon request)
6-channel touch screen hub for temperature display, alarms, configuration and data logging. Isolated RS485 Modbus master and slave interfaces allow multiple hubs to be connected to a larger network. Optional modules provide analogue and relay outputs.
The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.
The L-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine rotational adjustment about one axis.
The adjustable mounting bracket consists of a fixed mounting bracket plus another L-shaped bracket. When assembled as shown, the adjustable mounting bracket offers a rigid support for the sensor and allows fine two-axis adjustment.
The Laser Sighting Tool screws onto the front of the sensor during installation and shows precisely where the sensor is aiming. Once the sensor has been aimed at the centre of the target and locked in position, the Laser Sighting Tool can be removed. The laser is operated via a latching push button on the front of the tool.
The Dual Laser Sighting Bracket is a sturdy mount for the sensor and provides continuous target sighting while measurements are being taken. Two parallel lasers indicate the centre of the measured spot and are controlled by a remote switch on the electronics module.
When fitted over the lens of the sensor, the protective plastic window in stainless steel holder provides mechanical protection and helps retain fragments of lens in case of damage. Adjust the sensor’s emissivity setting to compensate for the presence of the window for maximum accuracy. This accessory is ideal for the food and pharmaceutical industries.