Aqualyzer-9065
Nuevo
Analizador de Oxígeno Disuelto en Agua Waltron
Disponible el:
El Analizador de Oxígeno luminiscencia 9065 utiliza una nueva tecnología luminiscente para medir el oxígeno disuelto en el agua a niveles de ppb.
Luminescent Dissolved Oxygen Technology
Tecnología luminiscente tiene características y beneficios únicos en comparación con tecnologías de detección de oxígeno disuelto tradicionales. El 9065 proporciona una alta precisión con una excelente estabilidad a largo plazo. El Analizador de Oxígeno Disuelto 9065 se puede utilizar en una variedad de aplicaciones de análisis en línea a través de muchas industrias diferentes.
CARACTERÍSTICAS | BENEFICIOS | |
Wide range analysis: 0.10ppb – 2000ppb (other ranges available on request) | No sensor maintenance (no membrane, no electrolyte) | |
No calibration for up to 2 years | Simple operation | |
Extremely fast response time | Compact design | |
No sample interference | ||
Excellent results independent of sample flow rate | ||
Use in liquid and gas applications | ||
High temperature alarm | ||
Multiple sensor configuration |
Range | 0.10ppb – 2000ppb (other ranges available on request) | |
Accuracy |
± +/- (1ppb + 2% of the measured value) |
|
Response Time |
t90 (90%) < 15 sec |
|
Units |
ppb, ppm, µg/L, mg/L, % O2, % a.s |
|
Current Outputs |
Two configurable 4-20mA current (analog) outputs |
|
Digital Output | Communication interface using RS-232 and RS-485 | |
Alarms |
General Alarm, Temperature Alarm, Two Concentration Alarms |
|
Response Time | 90%of a step change in 60 second | |
Power | 90 – 240 VAC ~ 50 – 60 Hz, 25 W | |
CE Certification (on request) | Meets low voltage and low electromagnetic compatibility directives |
Options | Profibus; multiple sensor configuration; certificate of measurement | |
Operating Conditions | ||
Sample Temperature | 23 – 113°F (-5 – 45°C) | |
Ambient Temperature | 32 – 131°F (0 – 55°C) | |
Pressure | Maximum of 145 psig (10 bar) | |
Sample Connection | 1/4” (6 mm) Swagelok | |
Sample Medium | Liquid or gas | |
Sample Memory | Up to 500 measurements | |
Mechanical | ||
Construction |
Transmitter – high strength ABS, IP65 (NEMA 4x) |
|
Dimensions | Combined Analyzer: Height=25.75”(65.4 cm), Width=8”(20.3 cm), Depth=6.25”(15.9 cm) Separated Transmitter: Height=10.92”(27.74 cm), Width=7” (17.78 cm), Depth=7.63”(8.99 cm) Separated Wet Section: Height = 10.5” (26.7 cm), Width = 4.5” (11.4 cm), Depth = 3.5” (8.9 cm) |
|
Mounting |
Wall mount or Panel mount |
|
Wiring | IP 65 Connections | |
Distance |
Up to 49ft (15 meters) on request |
|
Finish | Corrosion resistant |
695,00 €
240,00 €
385,00 €