3045 Analizador de Cobre en Agua View larger

3045 Analizador de Cobre en Agua

3045

Waltron

New

El analizador de cobre 3045 de Waltron es el instrumento más avanzado disponible en el mercado hoy en día para la medición en línea de cobre disuelto.

- QUALIDADE DA ÁGUA - Analisador de Cobre em Água

El analizador de cobre 3045 de Waltron es el instrumento más avanzado disponible en el mercado hoy en día para la medición en línea de cobre disuelto. El 3045 es solo capaz de proporcionar los resultados más precisos y precisos para aplicaciones de agua ultra-pura.

Range
0–1000ppb, 0–3000ppb


Accuracy
+/– 2% of full scale


Reproducibility
+/– 2% of reading


Analysis Time
7min, batch process


Sampling Frequency (Cycle Time)
One reading every 15 mins, adjustable


Sensor Classification
Colorimetric with glass flowcell and LED source


Power Supply
110-220Vac, 50-60 Hz 80 VA


Humidity
Up to 90% not condensable


Ambient Temperature Range
10-45°C analyzer (50-113°F)


Positioning and Installation Details
Wall mounting, bench supported, or panel mounting (optional)


Alarms
2 or 4 configurable alarm relays


Degree of Protection
IP55 (NEMA 4): Wet section, IP65 (NEMA 4x): Electronics


Required Maintenance
Once a month replenish reagents, Quarterly replace tubing


Reagent Consumption (approximate)
3 reagents, 2L each per month


Materials in Contact with Sample
Glass, Silicone, Plexiglass, Stainless Steel AISI 316


Certification (on request):
Meets low voltage and low electromagnetic compatibility directives


Sample Conditioning Requirements
Filtering between 10 and 60 micron, depending on the matrix, needed only to avoid clogging.


Weight
17 kg (37.5 lbs.)

SAMPLE DELIVERY OPERATING CONDITIONS

Temperature Range
5-55º C (41-131º F)


Inlet Sample
100–500 ml/min, atmospheric, flexible tubing O.D. 1/4" (6 mm)


Outlet Sample
Atmospheric, waste tubing O.D. 3/8 (9 mm)


PH
3-12

SIGNAL OUTPUTS

Analog Outputs
4-20mA (galvanic isolator module available as option) or 0-5V


Serial I/O for Signals
RS232, RS485; MODBUS; PROFIBUS

OPERATIONAL CALIBRATION

Frequency/Intervals
Recommended: 7 days


Single/Multi Point
Multi-Point: zero and mid range


Matrix Corrections
Yes, sample blank correction


Manual/Automatic
Both

30 other products in the same category: