UX120-006M Registrador HOBO de 16-bit con 4 Canales Analógicos




Grupo 1

Registrador de Datos para Interior con Display y 4 Canales Analógicos

199,00 €

Número de Canales 4 Analógicos
Nº Bits ADC 16 bit
Precisión ±0.1 mV
Resolución 40 µV
Con Display LCD
Clasificación IP Interior IP50
Comunicaciones USB
Duración Batería 1 año +
Capacidad Memoria 1.9 millones de medidas

El registrador analógico HOBO es un Data Logger de altas prestaciones (16-bit), LCD display data logger for building performance monitoring applications.

As Onset’s highest-accuracy data logger, it provides twice the accuracy of previous models, a deployment-friendly LCD, and flexible support up to four external sensors for measuring temperature, current, CO2, voltage and more.

The logger is ideal for energy audits, building commissioning studies, equipment scheduling, and more.

  • Twice the accuracy over previous models with 16-bit resolution
  • Flexible support for a wide range of external sensors
  • LCD confirms logger operation and displays near real-time measurement data
  • Provides minimum, maximum, average and standard deviation logging options
  • On-screen alarms notify you when a sensor reading exceeds set thresholds
  • Stores 1.9 million measurements for longer deployments between offloads

The UX120-006M Data Logger is for use in Indoor environments

The UX120-006M Data Logger supports the following measurements (some sensors sold separately):

Temperature, 4-20mA, AC Current, AC Voltage, Air Velocity, Carbon Dioxide
IMPORTANTE: HOBO data loggers require HOBOware software (USB interface cable included w/CD purchase). Ver la pestaña de sensores compatibles.

Logger con/Cable

Rango de Medida:
4-20mA (con/CABLE-4-20MA) 0 a 20.1 mA
0 a 2.5 V (con/CABLE-2.5-STEREO)
0 a 5 V (con/CABLE-ADAP5)
0 a 10 V (con/CABLE-ADAP10)
0 a 24 V (con/CABLE-ADAP24)

4-20mA ±0.001 mA ±0.2% de la lectura (con/CABLE-4-20MA
±0.1 mV ±0.1% de la lectura (con/CABLE-2.5-STEREO
±0.2 mV ±0.3% de la lectura (con/CABLE-ADAP5)
±0.4 mV ±0.3% de la lectura (con/CABLE-ADAP10)
±1.0 mV ±0.3% de la lectura (con/CABLE-ADAP24)

0.3 µA 4-20mA (con/CABLE-4-20MA)
40 µV (con/CABLE-2.5-STEREO)
80 µV (con/CABLE-ADAP5)
160 µV (con/CABLE-ADAP10)
384 µV (con/CABLE-ADAP24)


Operating Range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing);
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds
Logging Modes: Normal, burst, or statistics
Memory Modes: Wrap when full or stop when full
Start Modes: Immediate, push button, date & time, or next interval
Stop Modes: When memory full, push button, or date & time
Restart Mode: Push button
Time Accuracy: ±1 minute per month at 25°C (77°F), see Plot A
Battery Life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
Battery Type: Two AAA 1.5 V alkaline batteries, user replaceable
Memoria: 4 MB (1.9 million measurements, maximum)
Download Type: USB 2.0 interface
Full Memory Download Time: Approximately 1.5 minutes
LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
Dimensiones: 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)
Peso: 107.5 g (3.79 oz)
Environmental Rating: IP50


Modelo vigente

Modelo descatalogado

UX120-006M U12-006





1.9 Millones de Medidas

43,000 Medidas


±0.1 mV ±0.1% of reading

± 2 mV ± 2.5% of absolute reading


40 µV (16-bit)

0.6 mV (12-bit)

Accuracy with TMCx-Hx Temperature Probe (sold separately)

±0.15°C from 0° to 70°C (±0.27°F from 32° to 158°F)

±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F)

Accuracy with CTV-x AC Current Sensor (sold separately)

±2.1% of Full Scale

±4.5% of Full Scale

Wrap When Full



Alarmas Visibles



Minimum, Maximum, Average & Standard Deviation Logging Modes



Burst Logging Mode



Improved Case Design (includes built in Rare-Earth Magnets and mounting tabs)




10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.)

5.8 x 7.4 x 2.2 cm (2.3 x 2.9 x 0.9 in)

Compatible with HOBOware, and USB Cable

Si, funciona con un cable USB y el software gratuito HOBOware 3.6


Compatible con HOBO U-Shuttle



Sensores Compatibles:

30 otros productos en la misma categoría:

Los clientes que compraron este producto también han comprado...