7661S LAQUA Ion Fluoride Electrode Tip

Horiba

7661S LAQUA Ion Fluoride Electrode Tip

Horiba

7661S LAQUA Ion Fluoride Electrode Tip

Reference: 7661S (3200693606) - Manufacturer: HORIBA

Replacement electrode tip for combination and half-cell fluoride ion electrodes

The Sensor measures:: Fluoride Ions

English Brochure

Download (3.07MB)

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S) 2

Electrodes

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C (3200693774)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

You might also like

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S) 2

Electrodes

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C (3200693774)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

16 other products in the same category:

9425-10C LAQUA pH Electrode Combined with Plastic Body (for General Use)

9425-10C LAQUA pH Electrode Combined with Plastic Body (for General Use) 2

Electrodes

9425-10C LAQUA pH Electrode Combined with Plastic Body (for General Use)

9425-10C (3200611625)

This plastic-body, refillable pH electrode is recommended for general-purpose use. Previous model: 9621-10D

View

9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature Sensor

9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature Sensor 2

Electrodes

9520-10D LAQUA Electrode of DO Laboratory with Replaceable Tip DO 7541 and Temperature...

9520-10D (3014046711)

DO Electrodes (with 1m cable unless otherwise stated, BNC and phono jack - not applicable for replacement tips)

View

PFL Plate Electrode

Accessories (Cells, Electrodes, Kits, etc.)

PFL Plate Electrode

WonATech-ZIVE LAB

View

9300-10D LAQUA ORP Electrode

9300-10D LAQUA ORP Electrode 2

Electrodes

9300-10D LAQUA ORP Electrode

9300-10D (3014046710)

- The flat platinum sensor at the tip allows measurement of low-volume samples- Waterproof- Combination electrode

View

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S) 2

Electrodes

6561S-10C LAQUA Fluoride (Fl-) ISE Electrode Including 1 Electrode Tip (7661S)

6561S-10C (3200693774)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S)

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S) 2

Electrodes

6583S-10C LAQUA Electrode Calcium (Ca2 +) ISE with 2 Electrode Tips (7683S)

6583S-10C (3200697410)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA

6069-10C pH Electrode Combined Refillable Micro Tube with Glass Body (for Very Slender Test Tubes) for LAQUA 2

Electrodes

6069-10C LAQUA pH Electrode Combined Rechargeable Tube Glass Body (Very Thin Test Tubes)

6069-10C (3014081107)

This refillable pH electrode can measure samples in very slender test tubes (e.g., NMR test tubes) due to its long, thin, glass-body. - Electrode: 291mm length, 3mm diameter- Waterproof

View

3200705774 Ammonia Electrode Membrane Caps for LAQUA

3200705774 Ammonia Electrode Membrane Caps for LAQUA 2

SENSORS & PROBES

3200705774 Ammonia Electrode Membrane Caps for LAQUA

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA

3200611627 Combined pH Electrode Micro ToupH Glass Body 9418-10C (for Low Volume Samples) LAQUA 2

Electrodes

9418-10C LAQUA Combined pH Electrode Micro ToupH with Glass Body (for Low Volume Samples)

9418-10C (3200611627)

This glass-body, refillable pH electrode can measure samples as low as 50µL.- Compatible with extremely small sample containers (e.g., microtubes)- Temperature sensor is placed beside the bulb for quick response- Waterproof

View

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell) 2

Electrodes

1066A-10C LAQUA Electrode pH Type Standard with Glass Body (Half Cell)

1066A-10C (3014080432)

Very durable minimum alkali errors. Most widely used for general pH measurements.

View

7683S Calcium Ion Electrode Tip for LAQUA

7683S Calcium Ion Electrode Tip for LAQUA 2

Electrodes

7683S LAQUA Calcium Ion Electrode Tip

7683S (3200697414)

View

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell 2

Electrodes

3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) /...

3574-10C (3014082592)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S) 2

Electrodes

6560S-10C LAQUA Chloride (Cl-) ISE Electrode Including 1 Electrode Tip (7660S)

6560S-10C (3200697407)

Combination Ion Selective Electrodes, 1m cable, BNC, with disposable dropper, filling solution, 100 & 1000ppm and TISAB solutions 50ml each.

View

6261-10C PH Electrode Combined Flat Surface with Glass Body (for Flat Surface Measurement) LAQUA

6261-10C PH Electrode Combined Flat Surface with Glass Body (for Flat Surface Measurement) LAQUA 2

Electrodes

6261-10C LAQUA pH Electrode Combined Flat Surface with Glass Body (for Flat Surface...

6261-10C (3014081807)

The liquid junction of this glass-body, refillable pH electrode is located on the flat pH sensing membrane. Perfect for measuring samples in shallow containers (e.g., petri dishes) and gelatinous samples (e.g., nutrient agar). For pH measurement of meat, skin, leather, paper, leaves and cloth.

View

3573-10C Crystal Body Conductivity Electrode (For High Conductivity Water) LAQUA Conductivity Cell

3573-10C Crystal Body Conductivity Electrode (For High Conductivity Water) LAQUA Conductivity Cell 2

Electrodes

3573-10C LAQUA Conductivity Electrode with Crystal Body (For High Conductivity Water)...

3573-10C (3014082590)

Conductivity Electrode (with 1m cable, BNC and phono jack)

View

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples)

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and Non-Aqueous Samples) 2

Electrodes

9481-10C LAQUA Combined pH Electrode ToupH Sleeve with Glass Body (for Viscous and...

9481-10C (3200611631)

This glass-body, refillable pH electrode gives stable readings even in highly viscous samples and non-aqueous solutions (e.g., solvents, cosmetics, paints). Previous model: 9681-10D, 9677-10D.- The liquid junction is designed with a movable sleeve that prevents clogging. - Easy to clean and provides quick stable readings- Waterproof, Pb-free glass

View

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow