Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

Maintenance Kit for HOBO MX2501, Ref.: MX2500-MAINT-KIT

Reference: MX2500-MAINT-KIT - Manufacturer: Onset

This Maintenance Kit includes a Calibration Kit (MX2500-CAL-KIT) and an Electrode Storage Solution (MX2500-STORE-SOLN).

€119.00

Tax excluded Envío: 3 a 6 semanas

Accessories: Maintenance Kits

MX2500-MAINT-KIT Data Sheet

Download (80.18KB)

MX2500-MAINT-KIT Manual

Download (1.59MB)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

SENSORS & PROBES

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

This Anti-Biofouling Copper Guard may be used in addition to the standard electrode guard for extra protection against biofouling during logger uset.The anti-biofouling guard uses copper to reduce biofouling, while it still allowsproper water to flow around the sensor.The copper protects the data logger by interacting with the chemistry of the water in...

End cap for HOBO MX2501, Ref .: MX2500-END-CAP

SENSORS & PROBES

End cap for HOBO MX2501, Ref .: MX2500-End-Cap

MX2501 Low Cost pH and Temperature Logger

MX2501 Low Cost pH and Temperature Logger 2

WATER (TEMP, LEVEL & QUALITY)

MX2501 Low Cost pH and Temperature Logger

Easy data offload to mobile devices via BLE! The new low-cost HOBO® MX2501 pH and temperature recorder is designed for long-term pH monitoring in estuaries, lakes, streams, rivers and oceans. It communicates wirelessly via Bluetooth Low Energy (BLE) to the HOBOmobile® application on your phone or tablet, making it easier and faster to install, calibrate...

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

Replacement Electrode for HOBO MX2500, Ref.: MX2500-Electrode

WATER (TEMP, LEVEL & QUALITY)

Replacement Electrode for HOBO MX2501, Ref.: MX2500-Electrode

MX2500-Electrode

The gel electrolyte and double Pellon® junction of this electrode minimizes the chance of contamination of the reference electrolyte. The plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are very suited for environmental monitoring of lakes, streams, rivers, estuaries, and oceans.The electrode uses sample potentiometric and...

You might also like

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

WATER (TEMP, LEVEL & QUALITY)

Calibration Kit for HOBO MX2501, Ref.: MX2500-CAL-KIT

This Calibration Kit includes three buffer solutions in 475 mLiter bottles:- pH 4.01- pH 7.00- pH 10.00and two 4 oz. calibration beakers (MX2500-CAL-BKR)

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

SENSORS & PROBES

Copper Guard for HOBO MX2501, Ref.: MX2500-Guard

This Anti-Biofouling Copper Guard may be used in addition to the standard electrode guard for extra protection against biofouling during logger uset.The anti-biofouling guard uses copper to reduce biofouling, while it still allowsproper water to flow around the sensor.The copper protects the data logger by interacting with the chemistry of the water in...

End cap for HOBO MX2501, Ref .: MX2500-END-CAP

SENSORS & PROBES

End cap for HOBO MX2501, Ref .: MX2500-End-Cap

MX2501 Low Cost pH and Temperature Logger

MX2501 Low Cost pH and Temperature Logger 2

WATER (TEMP, LEVEL & QUALITY)

MX2501 Low Cost pH and Temperature Logger

Easy data offload to mobile devices via BLE! The new low-cost HOBO® MX2501 pH and temperature recorder is designed for long-term pH monitoring in estuaries, lakes, streams, rivers and oceans. It communicates wirelessly via Bluetooth Low Energy (BLE) to the HOBOmobile® application on your phone or tablet, making it easier and faster to install, calibrate...

pH Calibration Solution for HOBO MX2501, pH 4.01, 475 ml, Ref.: MX2500-CAL-4

WATER (TEMP, LEVEL & QUALITY)

pH Calibration Solution for HOBO MX2501, 475 ml, Ref.: MX2500-CAL

These pH 4.01, 7.00, and 10.00 Calibration Solutions (in 475 milliter bottles) are used to calibrate the pH electrodes in the HOBO MX pH Data Logger.

Replacement Electrode for HOBO MX2500, Ref.: MX2500-Electrode

WATER (TEMP, LEVEL & QUALITY)

Replacement Electrode for HOBO MX2501, Ref.: MX2500-Electrode

MX2500-Electrode

The gel electrolyte and double Pellon® junction of this electrode minimizes the chance of contamination of the reference electrolyte. The plastic-bodied electrode and the HOBO MX2501 pH and Temperature Data Logger are very suited for environmental monitoring of lakes, streams, rivers, estuaries, and oceans.The electrode uses sample potentiometric and...

16 other products in the same category:

MF1921Z iButton Temperature Logger, water resistant according to IPX8

MF1921Z iButton Temperature Logger, water resistant according to IPX8 2

INSIDE & OUTSIDE USE

MF1921Z iButton Temperature Logger (-5°C to +26°C, 2K), water resistant according to IPX8

Regarding the protection class, the MF1921Z is an improved version of the DS1921Z Temperature Logger iButton.

ExpressThermo-Pro Software for iButton Loggers

ExpressThermo-Pro Software for iButton Loggers 2

iButton

ExpressThermo-Pro Software for iButton Loggers

ExpressThermo-Pro

ExpressThermo Professional is a software to manage the iButton Thermochron®, Hygrochron® & iBTag® data loggers.2 Versions available:ExpressThermo-Pro: includes license only.ExpressThermo-Pro-Kit: includes license and cable Ref.: DS1402DX (including "Blue Dot DS1402D-DR8 Cable" + "1-Wire DS9490R" for iButton).Notes:- For Windows 8, 10 and later.- If...

CS05.1 Shielded sensor-Datalogger cable, 5m, with connector

WEATHER S. ACCESSORIES

CS05.1 Shielded sensor-Datalogger cable, 5m, with connector

Shielded sensor-Datalogger cable, terminated with PS2 connector on Datalogger side, and 7 pole IP68 connector on sensor side. 5m length.

S-ADAPT-6 Smart Sensor Adapter Case

S-ADAPT-6 Smart Sensor Adapter Case 2

Home

S-ADAPT-6 Smart Sensor Adapter Case rom 1 to 6 sensors

6612-Kit Solar Power Kit

6612-Kit Solar Power Kit 2

WEATHER S. ACCESSORIES

6612-Kit Solar Power Kit

SpecWare 10 Software

SpecWare 10 Software 2

WEATHER S. ACCESSORIES

SpecWare 10 Software

Spectrum Technologies

3654BX SpecWare 10 Basic Software - Cable Included3654PX SpecWare 10 Pro Software: Cable not included

TDR 120 Varilla Sonda 120mm para Medidor FieldScout TDR 100

TDR 120 Varilla Sonda 120mm para Medidor FieldScout TDR 100 2

ACCESORIES

6428FS4 Two Replaceable Rods FieldScout TDR Soil Moisture Meters

Spectrum Technologies

2 Interchangeable rods for FieldScout soil moisture meters: 3.8cm, 7.6cm, 12cm or 20cm.

BF5 Cross Arm

BF5 Cross Arm 2

WEATHER S. ACCESSORIES

BF5 Cross Arm

At AlphaOmega-Electronics you will find the best range ofWeather Stations Accessoriesand at the most competitive prices.

ExpressThermo-Basic Software for iButton Data Loggers (License and Cables)

ExpressThermo-Basic Software for iButton Data Loggers (License and Cables) 2

iButton

ExpressThermo-Basic Software for iButton Data Loggers (License and Cables)

ExpressThermo-Basic

Notes:- Includes license and cable Ref.: DS1402DX (including "Blue Dot DS1402D-DR8 Cable" + "1-Wire DS9490R" for iButton).- For Windows 8, 10 and later.- If you require another operating system, ask for it at: info@alphaomega-electronics.com

Universal Pole bracket for Professional Rain Gauges

Universal Pole bracket for Professional Rain Gauges 2

SENSORS & PROBES

500.312 Universal Pole bracket for Professional Rain Gauges

Universal Pole bracket for Professional Rain Gauges - item no. 500.312Fits Rain-O-Matic Professional Rain Gauges 300.021 and 300.023

CS05 Shielded sensor-Datalogger cable 5m

SENSORS & PROBES

CS05 Shielded sensor-Datalogger cable 5m

Shielded sensor-Datalogger cable, terminated with end sleeves Datalogger side and 7 pole IP68 connector on sensor side. 5m length.

RSSK-12 Rotary Sensor Kit

RSSK-12 Rotary Sensor Kit 2

Pot-Tech Electronics

SC-XX Signal Converter (Current Output)

Pot-Tech Electronics PVT LTD

View

SPL4 Wall support or pole arm for Nesa rain gauges

WEATHER S. ACCESSORIES

SPL4 Wall support or pole arm for Nesa rain gauges

Wall support or pole arm for Nesa rain gauges.Distance from the wall: about 30 cm

HD 2003.79 Mounting Kit Pyranometer on Clamping

HD 2003.79 Mounting Kit Pyranometer on Clamping 2

WEATHER S. ACCESSORIES

HD 2003.79 Mounting Kit Pyranometer on Clamping

SENSECA (Delta Ohm)

At AlphaOmega-Electronics you will find the best range ofWeather Stations Accessoriesand at the most competitive prices.

View

MF1921H iButton Temperature Logger, water resistant according to IPX8

MF1921H iButton Temperature Logger, water resistant according to IPX8 2

INSIDE & OUTSIDE USE

MF1921H iButton Temperature Logger (+15 to +46ºC, 2K), water resistant according to IPX8

Regarding the protection class, the MF1921H is an improved version of the DS1921H Temperature Logger iButton.

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series 2

Online only

WEATHER S. ACCESSORIES

UA-CASE Submersible PVC Case for Data Loggers HOBO UA Series

PVC Case for HOBO UA Loggers, prepared for extreme conditions. (Does not include data Logger)

Product added to wishlist

Product added to compare.

We use our own and third-party cookies to improve the browsing experience and offer content of interest. By continuing to browse we understand that you accept our Cookie Policies.

Allow