AO-RRFT(P)/A
New
Sem Display.
0 a 100% de humidade relativa
-30 ... + 100°C Temp.
Saída de HR: 4-20mA
Saída de Temp.: 4-20mA
Saída Opcional: 2 x 0-10 V
Availability date:
Com Display | No |
Classificação IP | IP65 |
O Sensor mede: | Temp. / Umidade Relativa |
Sinal de Saída: | 0-10 V o 4-20 mA |
Comprimento do Cabo: | 2m |
El sensor AO-RRFT(P)/A temperatura y humedad con sonda pendular mide la temperatura y selectivamente la humedad relativa, humedad absoluta, relación de aire combustible o punto de rocío del aire ambiente y lo transforma a una salida linear señal 0-10 V o 4-20 mA. El valor de medición secundario es seleccionable a partir de los 4 medición categorías r.H., gm³, gkg, DP por DIP switch. El sensor de temperatura y humedad está protegido contra la contaminación por un filtro sinterizado. Además, el instrumento de medición de la humedad tiene una función de calefacción integrada para la protección del sensor en el rango de humedad de 95... 99 der. Si la humedad relativa excede el valor umbral preajustado de fábrica para más de 10 minutos, se activa esta función de calefacción. Entonces el sensor será temporal calentado, así seca respectivamente protegidos contra la condensación. Durante el calentamiento y posterior compensación fase de temperatura, la señal de salida se mantiene estable en el último valor de medición antes de que se activó la función de protección. La humedad y el transductor de temperatura se pueden ajustar localmente para la calibración fina por un regulador de compensación.
Measurement range r.H. | 0...100% r.H. |
---|---|
Measurement range abs. humidity | 0...50 g/m³, 0...80 g/m³ (calculated) selectable by DIP switch |
Measurement range air fuel ratio | 0...50 g/kg, 0...80 g/kg (calculated) selectable by DIP switch |
Measurement range dew point | -20 up to +50°C DP, -20 up to +80°C DP, 0 up to +50°C DP (calculated) selectable by DIP switch |
Measurement range temp. | -30...+70°C, -20...+80°C, 0...+50°C, 0...+100°C selectable by DIP switch |
Accuracy | ±3% r.H. (30%...70% r.H., else ±5% r.H. at 20°C), ±0,3 K (10...40°C, else ±0,5 K) |
Temperature dependency | < 0,02% r.H. / °C (voltage output), < 0,04% r.H. / °C (current version); < 0,05°C / 10 K (voltage version), < 0,07°C / 10 K (current output) |
Long term stability | ±1%/year |
Sensor | capacitive humidity sensor |
Sensor protection | screwable stainless steel sinter filter, condensation protection by heating function in the range of 95...99% r.H. |
Flow rate | < 2 m/s |
Supply voltage at 0-10 V | 24 V AC/DC (±5%) |
Supply voltage at 4-20 mA | 15...36 V DC (Ubmin = 15 V + RLast*0,02A) |
Current consumption at 0-10 V | typ. 10 mA |
Current consumption at 4-20 mA | max. 20 mA |
Analogue output 0-10 V | 3-wire connection, load current <0,1 mA |
Analogue output 4-20 mA | 2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A |
Electrical connection | screw terminals max. 1,5 mm² |
Cable | 2 m shielded PVC cable |
Housing | polyamide with snap closing screws, colour white like RAL 9010 |
Cable gland | PG11 high-strength cable gland with strain relief |
Display | optional LCD-Display, to display the actual humidity and temperature |
Material | Pendulum: brass nickel-plated |
Dimensions | Protection tube: Ø 16 x 60 mm |
Protection type | IP65 |
Protection class | III |
Working range r.H. | 0...98% r.H. in contaminant-free, non-condensing air |
Working temperature | Probe: -20...+80°C, Electronic: -30...+70°C |
Storage temperature | -20...+50°C |
Installation | screw fastening |
Approvals | CE-conformity, EAC, RoHS |
60,00 €
52,00 €
66,00 €
66,00 €
69,00 €
37,00 €
124,00 €
225,00 €
175,00 €
225,00 €
175,00 €
255,00 €
205,00 €
255,00 €
245,00 €
36,50 €
310,00 €
199,00 €
178,00 €
95,00 €
28,00 €
28,00 €
35,00 €
24,00 €
650,00 €
657,00 €
29,99 €
140,00 €