SERIE ST FONTES DE ALIMENTAÇÃO DE ALTA TENSÃO DE 12 KW

SERIE ST

Spellman

New

INSTRUMENTOS DE MEDIÇÃO E CALIBRAÇÃO Fontes Alimentação CC

As fontes de alimentação de alta tensão ST de 12 kW da Spellman estão disponíveis em polaridade positiva ou negativa em 20 modelos diferentes com saídas na faixa de 1 kV a 225 kV. Um painel frontal com todos os recursos permite um controle local fácil, enquanto uma interface analógica completa fornece funções remotas extensas. As interfaces digitais Ethernet e RS-232 padrão simplificam a integração da série ST ao design do seu sistema.

O robusto inversor IGBT da série ST é inerentemente tolerante a falhas e ideal para aplicações exigentes, como processamento de semicondutores e deposição a vácuo. O usuário pode configurar muitos recursos operacionais para atender a seus requisitos específicos. Mais de 100 kW de potência podem ser fornecidos configurando um chassi adicional em paralelo.

Aplicações típicas:

    Implantação de Raios Iônicos
    Processamento de semicondutores
    Soldagem por feixe de elétrons
    Carregamento do capacitor
    Transmissores de RF de alta potência
    Precipitadores eletrostáticos
    Sistemas de raios X

Input Voltage:

Standard:  180-264Vac, 50/60Hz, three phase, 90% efficiency, 0.85 power factor

Optional:  360-528Vac 50/60Hz, three phase (400Vac)

Input Current:

Standard:  180-264Vac, three phase; 50 amps, maximum

Optional:  360-528Vac, three phase; 25 amps, maximum

Output Voltage:

20 models from 1kV to 225kV. Each model is available with positive or negative outputs. 1kV to 10kV units are internally reversible.

Local Output Controls:

Voltage and current are continuously adjustable over entire range via ten-turn potentiometers with lockable counting dials.

Voltage Regulation:

Load: 0.05% of full voltage +500mV for full load change.

Line: 0.05%of full voltage +500mV over specified input range.

Current Regulation:

Load: 0.05% of full current ±100µA for any voltage change.

Line: 0.05% of full current over specified input range.

Ripple:

0.3% p-p +1Vrms. Lower ripple available via special order

Stability:

0.02%hr. after 1 hour warm-up.

Temperature Coefficient:

100ppm/°C. Higher stability (50ppm/°C) available on special order via the HS option

Environmental:

Temperature Range:

Operating: 0°C to 40°C

Storage: -40°C to 85°C

Humidity: 10% to 90% RH, non-condensing.

Cooling:

Forced air; inlet through side panels, outlet at rear panel

Metering:

Digital voltage and current meters, accurate to within 1%

System Status Display:

“Dead Front” type indicators provide status of up to 12 system operations including voltage and current regulation, fault conditions and circuit control.

Digital Interface:

Ethernet and RS-232 digital interface implemented with 12 bits of resolution. A VB GUI is provided.

Input Line Connector:

A 6 foot (1.8 meter) long captive line cord is provided.

Analog Interface Connector:

50 pin female D connector

High Voltage Output Cable:

1-150kV: A detachable 10’ (3.05m) long shielded HV cable is provided

225kV: R-28 type X-Ray connector. No output cable is provided

Dimensions:

10.5˝ (6U)H X 19˝ W X 21˝ D (266mm x 482mm x 533mm)

150kV: 10.5˝ (6U)H X 19˝ W X 23˝ D (266mm x 482mm x 584mm)

225kV: 20.55˝ H X 17.01˝ W X 29.7˝ D (521mm x 432mm x 754mm)

Weight:

1kV to 50kV: <100 pounds (45.36kg)

60kV to 120kV: <140 pounds (63.50kg)

150kV: <150 pounds (68.03kg)

225kV: <260 pounds (117.9kg)

Individual kV models may vary 

Regulatory Approvals:

Compliant to EEC EMC Directive. Compliant to EEC Low Voltage Directive. RoHS Compliant.

Digital Interface 

The ST features a standard RS-232 and Ethernet digital interface. Utilizing these standard digital interfaces can dramatically simplify power supply interfacing require­ments saving the user both time and money, while enhan­cing functionality and overall capability. Spellman pro­vides a GUI with the ST that allows the customer to both customize operational features of the ST while also pro­viding basic power supply operational features. Details of the ST’s digital interface capability are described in detail in the ST manual, downloadable via the link on the first page of this data sheet.

3 other products in the same category: