H3021P Transmisor de Temperatura y Humedad para Aire Comprimido

Comet System

Nuevo

Humidistato, termostato con dos salidas de relé. Para uso al aire libre o en interior.
Sonda de Temp. y Humedad Relativa de aluminio anodizado duro para aire comprimido hasta 25 bares con 1 m de cable.
Cables longitud 2m o 4m disponible opcionalmente.

Humedad, sonda de temperatura en un cable. Valores medidos también se convierten en otra interpretación de la humedad: temperatura del punto de rocío, humedad absoluta, humedad específica, proporción, entalpia específica de la mezcla.

415,00 €

sin IVA

Clasificación IP Electrónica IP65, sensores IP40
El Sensor mide: Temp./Humedad Relativa
Señal de Salida: Relés
Alimentación: 9-30 Vdc

Incluye:

  • Certificado de calibración
  • Manual de inicio rápido
  • Programa gratuito TSensor para configurar el transmisor.

Humidistato está diseñado para el control de dos Estados de por ejemplo, calefacción, ventilación, deshumidificador, humidificador, etc..
Transmisor está equipado con dos salidas de relé para indicación de alarma o control de dispositivos externos. Cada relé puede asignarse a cualquier valor medido o computada. Para cada relé está habilitado ajuste de retardo, histéresis, alarma audible.
Medición de temperatura y humedad relativa se recalcula a otras interpretaciones de humedad - temperatura punto de rocío, humedad absoluta, humedad específica, relación o entalpía específica de la mezcla.
Parámetros son fácil ajustable desde teclado de regulador o del ordenador. Grande doble línea LCD para visualización simultánea de temperatura, humedad relativa u otra interpretación de humedad calculado es una ventaja.
Sensor de polímero capacitivo de vanguardia garantiza una excelente calibración a largo plazo estabilidad, inercia contra el agua y la condensación.

Transmisor está diseñado para uso en entorno no agresivo.

Sonda de T/RH de aluminio anodizado duro con cable de 1m. Cable longitud 2m o 4m disponible opcionalmente.

APLICACIONES DE HUMIDISTATO

- Control de temperatura y humedad

- Monitoreo de temperatura, la humedad:

  • Gestión y automatización del edificio
  • Salas de servidores
  • Dispositivos de la telecomunicación
  • Almacenes, invernaderos
  • Fabricantes
  • Museos, archivos, galerías
  • Habitaciones con aire acondicionado, climatización
  • Estaciones meteorológicas

 

Relative humidity range

 

 

 

Figure: Relative humidity operating range

Output None
Measured Value Relative Humidity + Temperature
Construction Type Compressed Air Humidity Up To 2.5MPa
Design Industrial
Temperature Measuring Range -30 to +105°C
Relay Output Yes
Two-State Input No
Lcd Display Yes
PoE No
Maximum switching voltage, current, power of relay output 50V, 2A, 60VA
Audible alarm from built-in beeper - switchable
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Accuracy of temperature output ±0.4°C from -30 to +100°C
±0.4% from reading over +100°C
Available temperature units degrees Celsius, Fahrenheit
Dew point temperature range -60 to +80 °C

Accuracy of dew point temperature output

(for more details see instruction manual)

±1.5°C for dew point temperature +10°C and higher at ambient temperature +25°C
Accuracy of dew point temperature output ±2.0°C for dew point temperature 0°C at ambient temperature +25°C
Accuracy of dew point temperature output ±3.0°C for dew point temperature -10°C at ambient temperature +25°C
Accuracy of dew point temperature output ±6.0°C for dew point temperature -20°C at ambient temperature +25°C
Accuracy and range of absolute humidity output ±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400 g/m3
Accuracy and range of specific humidity output ±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
Accuracy and range of mixing ratio output ±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
Accuracy and range of specific enthalpy output ±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
Temperature operating range -30 to +80°C
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Temperature compensation of the humidity sensor all temperature range
Filtering ability of sensor cover 0.025mm - filter with stainless steel mesh
IP protection IP65 electronics, IP40 sensors
Power 9-30Vdc, power consumption approximately 1W
Mechanical connection of probe G1/2 with O-Ring
Length of the probe cable 1m, 2m or 4m optionally
Dimensions 136 x 159 x 45 mm (W x H x D), probe length 150 mm, probe diameter 18mm
Weight approximately 450g
Warranty 2 years
Ac/dc adapter 12V/450mA stabilized
code: A1510
Ac/dc adapter 12V/450mA stabilized
cable for transmitter adjustment via USB port
code: SP003
cable for transmitter adjustment via USB port
Wall holder for external probes DIGIL
code: SP009
Wall holder for external probes DIGIL
plastic sensor protection with stainless filter (black)
code: F5200B
plastic sensor protection with stainless filter (black)
PTFE sensor protection, white
code: F5300
PTFE sensor protection, white
Flow chamber for compressed air measurement up to 25 bars
code: SH-PP
Flow chamber for compressed air measurement up to 25 bars
Tool for easy connection to WAGO terminals 233 for serial output transmitters
code: SP006
Tool for easy connection to WAGO terminals 233 for serial output transmitters
Humidity Standard 10%RH, set 5pcs
code: HM023
Humidity Standard 10%RH, set 5pcs
Humidity Standard 80%RH, set 5pcs
code: HM024
Humidity Standard 80%RH, set 5pcs
Vessel for adjustment and calibration of humidity
code: MD046
Vessel for adjustment and calibration of humidity

30 otros productos en la misma categoría: