CM-01 Series Data Logger CO2 con Alarma

CM-0052 100%
CM-0155 65%
CM-0154 30%
CM-0153 5%
CM-0152 1%
CM-0132 1% 2Hz (fast response)

The iSense sampling Data Logger is designed for both permanent and temporary installations in industrial settings. It features a built-in gas sampling pump, internal memory for data logging, a relay and outputs for CO2 level control. 

To maximize connectivity, the iSense features a M12 (12-pin) connector for RS-485, 4-20mA loop output, a 1A 30VDC (NO/NC/COM) relay and connection to a 24VDC power. These inputs and outputs allow for easy interfacing with existing PLC and RS-485 MODBUS capable data networks. The NEMA 4-rated enclosure makes it suitable for permanent wall-mounted industrial applications.

Inside the iSense  is a instrumentation pump connected to two tube ports on the side of the unit. When the unit is operating, the pump draws gas from one tube port and exhaust it from the other. By connecting tubing to the inlet, you can remotely sample gas. By connecting tubing to both ports, you can create a closed-loop system and return the gas back to the original container. This makes the iSense perfect for measuring potentially dangerous high concentrations of CO2 in biological applications, or for small volume head space measurements.

In leak detect mode, the display change colors when CO2 concentrations go over or under a programmable level. This settings can be changed in the software.

• • CO2 Measurement: non-dispersive infrared (NDIR)
  • Measurement Ranges:
  • 1% (0-10,000 ppm) CM-0152
  • 5% (0-50,000 ppm) CM-0153
  • 30% (0-300,000 ppm) CM-0154
  • 65% (0-650,000 ppm) CM-0155
  • 100% (0-1,000,000 ppm) CM-0052
  • Sampling Method: Tube sampling (0.5 liters/minute)
  • 2 second measurement cycle
  • Sensor Life Expectancy: > 15 years
  • Maintenance Interval: No maintenance required
  • Size: 5.75×5.6×1.3in (146×91×33mm)
  • Tubing sizes: 3/32 or 1/8'
  • 4-20 mA signal
  • RS485 MODBUS
  • Relay output; (NC/NO/COM) programmable to control or alarm CO2 concentration
  • USB weather proof connection

   

  Accessories Included

  • 1- 6' USB Cable
  • 1- M12, 12 Position 5M Cable (CM-0127)
  • 1- Fitting, Tubing & Filter Kit
  • 1- Extreme Conditions Moisture Trap & Filter (CM-0103)

  Power

  • 24 VDC

  System Requirements for Data Logging or Changing Defaults

  • Windows XP SP3 or higher
  • Microsoft .Net Framework 3.5 SP1
  • Pentium 4 (or newer) operating at 2.4 Ghz or faster
  • 1 GB of Random Acess Memory (RAM)
  • Hard Disk Space with at least 20 Megabytes (MB) free (200+MB recommended for longs and application files)

  Optional

  • 12 Pin RS-485 Cable with Power (CM-0182)

  Warranty:

  • 1 Year