H0530 Thermometer with Ethernet Interface and Relays View larger

H0530 Thermometer with Ethernet Interface and Relays

H0530

Comet System

New

Sensor H0530 is designed for online monitoring of temperature. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.

312,00 €

Add to wishlist

Communications Ethernet
The Sensor measures: Temperature
Output Signal: Relays

APPLICATIONS:

Server rooms monitoring

Temperature and binary inputs monitoring of the server rooms and rack units, SNMP monitoring, alert by email and Syslog

Building HVAC management

Temperature monitoring of buildings, history data to Comet Database, alert by email or SMS

Warehouses

Temperature monitoring of storage, history data to Comet Database or 3rd party SCADA system

Museums, archives, galleries

Temperature is requested for rooms where old valuable documents are stored, history data to Comet Database, alert by email or SMS

Factories and manufacturing

Temperature monitoring for food processing industry, pharmaceutical industry, aerospace industry, etc.

Air-conditioned rooms

Temperature rising indicates cooling fault, alert by email

Output Ethernet
Measured Value Temperature
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range -30 to +80°C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Accuracy of temperature output ±0.4°C
Resolution 0.1°C
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Temperature operating range -30 to +80°C
IP protection IP40
Number of relay outputs 2
Maximum switching voltage, current and power of the relay output 50V, 2A, 60VA
Number of binary inputs 3
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500ms
Low voltage level at binary input 0 to +0.5V
High voltage level at binary input +3.0 to +30V
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP
Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration T-Sensor, Telnet, keyboard
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Dimensions 136 x 191 x 45mm (W x H x D), stem length 53mm
Weight approximately 340g
Warranty 2 years
ac/dc adapter 230Vac to 12Vdc/0.5A
code: A1515
ac/dc adapter 230Vac to 12Vdc/0.5A
The LD-12 flood detector
code: LD12
The LD-12 flood detector
The optical smoke detector SD-280
code: SD280
The optical smoke detector SD-280
Motion detector JS20
code: JS20
Motion detector JS20
Magnetic door contact SA-200-A
code: SA200A
Magnetic door contact SA-200-A
Magnetic door contact with cable length 10m
code: SA200A-10
Magnetic door contact with cable length 10m
Magnetic door contact with cable length 15m
code: SA200A-15
Magnetic door contact with cable length 15m
Magnetic door contact with cable length 2m
code: SA200A-2
Magnetic door contact with cable length 2m
Magnetic door contact with cable length 20m
code: SA200A-20
Magnetic door contact with cable length 20m
Magnetic door contact with cable length 30m
code: SA200A-30
Magnetic door contact with cable length 30m
Magnetic door contact with cable length 5m
code: SA200A-5
Magnetic door contact with cable length 5m
Power detector SP008
code: SP008
Power detector SP008
Tool for easy connection to WAGO terminals 233 for serial output transmitters
code: SP006
Tool for easy connection to WAGO terminals 233 for serial output transmitters
KIT-GSM modem Fastrack Xtend
code: KIT-GSM-W
KIT-GSM modem Fastrack Xtend
TL-POE10R - PoE splitter
code: TL-POE
TL-POE10R - PoE splitter
TP-LINK-TL WA5110G wifi adapter
code: TP-LINK-TL
TP-LINK-TL WA5110G wifi adapter

30 other products in the same category: