C3121P Thermo-hygrometer for compressed air measurement (-30 to +105°C) (5 to 95%RH)

C3121P

Comet System

New

Thermo-hygrometer (-30 to +105°C) (5 to 95%RH)

Thermometer, hygrometer is designed for direct measurement of temperature, relative humidity for compressed air up to 25 bars with 1m cable. Audio and optical alarm of measured values. Memory of minimum and maximum measured values. Function Hold - manual storing of actual values for later displaying.

Simultaneous reading of temperature and relative humidity, dew point temperature reading selectable, built-in sensors.

"

280,00 €

Add to wishlist

Simultaneous reading of temperature and relative humidity, dew point temperature reading selectable, external temperature-humidity probe with 1meter cable. Cable lengths 2 and 4 meters available optionally.

Included in delivery:

Instrument including the battery

  • Traceable calibration certificate
  • Instruction manual
  • Plastic transport case
  • Connector for external ac/dc adapter
Measured Value Relative Humidity + Temperature
Construction Type Compressed Air Humidity Up To 2.5MPa
Temperature Measuring Range -30 to +105°C
Data Logging Function No
Operating temperature range -10 to +60°C
Temperature sensor RTD Ni1000/6180ppm
Accuracy of temperature measurement with built-in sensor ±0.4°C
Accuracy of air humidity measurement ±2.5%RH from 5 to 95% at 23°C, resolution 0.1%
Dew point temperature range -60 to +80 °C
Accuracy of dew point temperature (for more details see instruction manual) ±1.5°C for dew point temperature +10°C and higher at ambient temperature +25°C
Accuracy of dew point temperature ±2.0°C for dew point temperature 0°C at ambient temperature +25°C
Accuracy of dew point temperature ±3.0°C for dew point temperature -10°C at ambient temperature +25°C
Accuracy of dew point temperature ±6.0°C for dew point temperature -20°C at ambient temperature +25°C
Power battery 9V
Battery life 4 months typically
Dimensions 141 x 71 x 27 mm, probe length 150mm, probe diameter 18mm
IP protection IP20 instrument, IP40 T+RH probe
Mechanical connection of the probe G1/2 with O-Ring
Length of the probe cable 1m, 2m or 4m optionally
Weight including battery without probe approximately 150 g
Warranty 2 years
ac/dc adapter 230Vac to 12Vdc/0.5A
code: A1515
ac/dc adapter 230Vac to 12Vdc/0.5A
NiMH rechargeable batt. 9V/200mAh
code: A3400
NiMH rechargeable batt. 9V/200mAh
plastic sensor protection with stainless filter (black)
code: F5200B
plastic sensor protection with stainless filter (black)
PTFE sensor protection, white
code: F5300
PTFE sensor protection, white
Multi-plate radiation shield
code: F8000
Multi-plate radiation shield
Humidity Standard 10%RH, set 5pcs
code: HM023
Humidity Standard 10%RH, set 5pcs
Humidity Standard 80%RH, set 5pcs
code: HM024
Humidity Standard 80%RH, set 5pcs
Vessel for adjustment and calibration of humidity
code: MD046
Vessel for adjustment and calibration of humidity
PP4 Flat circular flange
code: PP4
PP4 Flat circular flange
PP90 Right-angled stainless steel flange
code: PP90
PP90 Right-angled stainless steel flange
Flow chamber for compressed air measurement up to 25 bars
code: SH-PP
Flow chamber for compressed air measurement up to 25 bars

27 other products in the same category: