LPPYRA10 Series – Pyranometers Spectrally Flat Class A

Delta Ohm

New

◆ Spectrally Flat Class A (secondary standard) pyranometer according to ISO 9060:2018 supplied with shade disk, cartridge with silica-gel crystals, 2 spare sachets, levelling device and Calibration Report.
◆ On request cable CPM12AA4…(not included)

2 080,00 €

tax excl.

Add to wishlist

The Sensor measures: Solar Light Radiation W/m2

The pyranometers LPPYRA10 measure the irradiance on a flat surface (Watt/m²). Range 0-2000W/m² or 0-4000W/m². The radiation measured is the sum of direct solar irradiance and diffuse irradiance (global radiation).

The LPPYRA10 are pyranometers classified as Spectrally Flat Class A (Secondary Standard) in accordance with ISO 9060:2018 and according to the WMO

The pyranometers are available in five versions:

 LPPYRA10 –  PASSIVE
 LPPYRA10AC – ACTIVE with CURRENT 4..20 mA output. Measuring range: 0…2000 W/m² or 0…4000 W/m² (LPPYRA10AC4).
 LPPYRA10ACS – double 4…20mA current output and RS485 serial output with MODBUS-RTU protocol. Measuring range: 0…2000 W/m² or 0…4000 W/m² (LPPYRA10ACS4).
 LPYRA10AV – ACTIVE with VOLTAGE 0..1 V, 0..5 V or 0..10 V output. Measuring range: 0…2000 W/m² or 0…4000 W/m² (LPPYRA10AV4).
 LPPYRA10S – with MODBUS RS485 output
 LPPYRA10S12 – with SDI-12 output

The pyranometer is supplied with shade disk, cartridge with silica-gel crystals, 2 spare sachets, levelling device. It is also factory calibrated and supplied with a calibration report.

The calibration is carried out in accordance with the ISO 9847:1992 (type IIc) standard: ”Calibration of field pyranometers by comparison to a reference pyranometer”. The pyranometer is calibrated by comparison with the reference sample calibrated annually at WRC (World Radiation Center).


Environmental studies
Research
Meteorlogy
PV monitoring

30 other products in the same category: