Induction Heaters (+250ºC Max.)3 Yokes
The BALTECH HI-1633 induction heater is a unique development which makes it possible to heat three parts simultaneously. The new induction heater with three yokes and electronic control has no analogues in the world. The induction heating can be conducted on one yoke, on two yokes or on three yokes simultaneously.
The number of the active yokes is set by the switch 1-2-3. The induction heating of bearings, half- couplings, rings and parts can be performed both horizontally and vertically. Remember, that this induction heater 3 times saves your time, while its price is less than the price of three similar heaters. It is intended to heat bearings and parts weighing up to 25 kg with a maximum diameter 480 mm.
|Model||BALTECH HI-1633 (3 yokes)|
|Nominal power , kVA||7,2|
|Voltage , V/Current,А||220/32|
|Maximum bearing weight, kg||100|
|Minimum inner diameter d, mm||20|
|Maximum outer diameter D, mm||350|
|Yoke width, mm||14;20;30;45|
|Yoke length, mm||250|
|Temperature setting, °С
Maximum temperature, °С
|Automatic power reduction||Yes|
|Heater weight (without yoke), kg||110|