HI-1630 Induction Heaters (+240ºC Max.) View larger

HI-1630 Induction Heaters (+240ºC Max.)




Induction Heaters (+240ºC Max.)

Add to wishlist

BALTECH HI-1630 is a small- size, lightweight, high-performance and cost-effective induction heater with an electronic control. The induction heating can be conducted horizontally and vertically. The heater has the function of automatic demagnetization of bearings upon reaching a defined temperature. The induction heater is intended to heat parts weighting 25-55 kg with a maximum outer diameter 480 mm.

For fast and reliable bearing assembling it is necessary to heat an inner ring. Remember, that a closed bearing with oil should not be heated because the oil will flow out and the bearing will go dry. The bearing assembling with the induction heater BALTECH HI-1630 is controlled by a microprocessor and temperature sensor.

Model BALTECH HI-1630
Nominal power , kVA 3,6
Voltage , V/Current,А 220/16
Frequency, Hz 50
Rotatable yoke Yes
Heated part
Maximum bearing weight, kg 55
Minimum inner diameter d, mm 20
Maximum outer diameter D, mm 480
W, mm 120
H, mm 155
Yoke dimensions
Yoke width, mm 14;20;30;45
Yoke length, mm 250
Control panel
Temperature setting, °С
Maximum temperature, °С
Automatic power reduction Yes
Dimensions, mm 470х210х260
Heater weight (without yoke), kg 25

9 other products in the same category: