Manual: Shuttle U-DTW-1
HOBO data carrier U-DTW-1 submersible and compatible for HOBO Data Recorders with USB optical interface.
It is submersible up to 20 meters.
It can also be used as a base station to dump the data
from the recorders to the PC.
NOTE:Couplers included for compatibility with five of the most popular recorders including: UA Pendants, U20 water level loggers, the U22 Water Temp Pro v2, our UTBI TidbiT, U24 Conductivity and U23 loggers.
NOTE:Requires HOBOware Pro software. See options
Onset offers a range of data recovery and communication options to make downloading data from HOBO recorders fast and easy.
Environment: The U-DTW-1 is for use in indoor, outdoor and underwater environments
Compatibilidad: All HOBO U-Series loggers with optic USB.
Not compatible with the HOBO U-Shuttle (U-DT-1).
Requisitos: HOBOware 2.2+
Compatible logger and matching coupler
- For UA Pendant (Part # COUPLER2-A)
- For U20 Water Level (Part # COUPLER2-B)
- For U22 Water Temp Pro v2 (Part # COUPLER2-C)
- For UTBI TidbiT v2 (Part # COUPLER2-D)
- For U23 HOBO Pro v2 (Part # COUPLER2-E)
Capacidad de Datos: 63 logger readouts of up to 64K each
Temperatura Operativa: 0° to 50°C (32° to 122°F)
Storage temperature: -20° to 50°C (-4° to 122°F)
Wetted materials: Polycarbonate case, EPDM o-rings and retaining
Waterproof: To 20 m (66 feet)
Time accuracy ± 1 minute per month at 25°C (77°F)
Logger-to-shuttle transfer speed: Reads out one full 64K logger in about 30 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 10 to 20 minutes, depending on computer
Batteries: 2 AA alkaline batteries required for remote operation
Battery life: One year or at least 50 complete memory fills, typical use
Peso: 150 g (4 oz)
Dimensiones: 15.2 x 4.8 cm (6.0 x 1.9 inches)
The CE Marking identifies this product as complying with the relevant directives in the European