ZM/O Meteorology Accessories

Fuehler Systeme

New

- Cross brace
- Traverse
- Base plate

130,00 €

tax excl.

Add to wishlist

Sensors Accessories: Various
Mounting Accessories: Flanges and supports

Instrument holders: For field installation of meteorological measuring instruments. Consisting of mast tube, mounting cross, earth pins for ground installation or dowel pins for fundament as well as a staying and earth clamp.
Telescopic Mast: For the field installation of meteorological measuring instruments. Mast with staying, base plate and adaptor. The base plate has a tilting mast receptacle. Traverse for Classic Wind Transmitters: For mounting the wind speed transmitter and wind direction transmitter jointly onto a mast. The traverse is connected with plug according to the transmitter combinations.

Article No. ZM/O-30
Description Traverse for 2 Wind Transmitter (Classic-Line) for joint installation of wind speed and wind direction sensor on a mast top
Material aluminum, anodised
Pipe dimension 1 1/2 inches according to DIN 2448 (Ø 48.3 x 2.6 mm)
Sensor distance Horizontal 0.6 m, Vertical 0.2 m
Mounting bore Ø 71 x 74 mm
Dimensions height 0.8 m
Weight 3000 g
Article No. ZM/O-35
Description Traverse for 1 wind generator (Compact-Line) for mounting wind speed or wind direction sensors on a facade
Material aluminum
Assembly screw fastening
Encoder distance 0.2 m
Weight 300 g
Article No. ZM/O-40
Description Traverse for 2 Wind Transmitter (Compact-Line) for joint installation of wind speed and wind direction sensor on a mast
Material Traverse made of aluminum, mounting kit made of stainless steel V2A
Mounting Mast with clamping range Ø 48-102 mm
Sensor distance 0.8 m, 0.4 m from the mast
Weight 300 g
Article No. ZM/O-50
Description Traverse short for 1 wind sensor (Compact-Line) for mounting wind speed or wind direction sensor on a mast
Material Traverse made of aluminum, mounting kit made of stainless steel V2A
Mounting Mast with clamping range Ø 48-102 mm
Sensor distance 0.4 m from the mast
Weight 300 g
Article No. ZM/O-60
Description Holder for 1 wind sensor (Compact-Line) for mounting wind speed or wind direction sensors on a surface, pole or pipe
Material stainless steel V2A
Dimension 80 x 150 mm, hole for pipe diameter Ø 34 mm
Mounting Mast with clamping range Ø 35-50 mm or wall surface
Weight 350 g
Article No. ZM/O-65
Description Mounting bracket for lateral fixing of the weather station FS6003 on a vertical surface, 250 x 42 mm
Article No. ZM/O-70
Description Base plate with adapter for attaching pyranometer to a crossbeam
Material aluminum, anodised
Dimension 100 x 115 x 65 mm
Weight 500 g
Article No. ZM/O-75
Description Spigot complete for transducer adaptation on traverses Compact
Material POM
Dimensions 40 x 65 mm
Weight 100 g
Article No. ZM/O-76
Description Adapter/pin complete for transducer adaptation on traverses Compact
Material aluminum
Dimension 40 x 75 mm
Weight 250 g
Article No. ZM/O-80
Description Lightning rod for additional attachment to a mast, pipe or crossbar to protect the wind transmitter from destruction by lightning strikes
Material stainless steel
Dimension height 560 mm
Weight 340 g
Article No. ZM/O-90
Description Connection cable for FS6002, 10 m FRNC 16 x 0.25 mm², open ends on the receiving side, shielded, halogen-free, UV-resistant
Article No. ZM/O-91
Description Connection cable for FS6003, 10 m, 7-pin, open ends on the receiving side, shielded, halogen-free, UV-resistant

30 other products in the same category: