No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Catalog
CONDUCTIVITY MEASUREMENTS
-
1076A-10C LAQUA Electrode for pH Glass Body (Measurement of Low Conductivity Water and Non-Aqueous Solvents)
Uses a glass membrane highly sensitive to lowconductivity water and nonaqueous solvents. Can also be used for ordinary pH measurement.
-
3551-10D LAQUA Conductivity Electrode (Submersible Type / Low Water Conductivity) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3552-10D LAQUA Conductivity Electrode (Submersible / General Use Type) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3553-10D LAQUA Conductivity Electrode (Submersible Type / High Conductivity Water) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3561-10D LAQUA Conductivity Electrode (Flow Type / Low Conductivity Samples) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3562-10D LAQUA Electrode for Conductivity Crystal Body (Flow Type / General Use) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3573-10C LAQUA Conductivity Electrode with Crystal Body (For High Conductivity Water) Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
3574-10C LAQUA Conductivity Electrode with Crystal Body (10 μS / cm-100mS / cm) / Conductivity Cell
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
6377-10D LAQUA pH 3-1 Electrode Sleeve Mobile Body Glass (Low Conductivity Samples and Non-Aqueous Solvents)
The glass membrane of this glass-body, refillable pH electrode with integrated temperature sensor, is highly sensitive to low-conductivity samples and non-aqueous solvents.
-
9382-10D LAQUA Electrode Conductivity (Submersible) Conductivity Cell with Temperature Sensor
Conductivity Electrode (with 1m cable, BNC and phono jack)
-
9630-10D LAQUA pH 3 in 1 Electrode with Plastic Body (for Low Conductivity Samples)
This plastic-body, refillable pH electrode with integrated temperature sensor is recommended for pH measurement of samples that have low conductivity or buffering capacity. Suitable for tap water and quality control check in water purification plant. Recommended to use with cleaning solution 230.
-
A5000T Soil Thermal Conductivity Meter
A5000T is a device specifically studied to measure the heat transmission of the ground (tendency of the ground to transmit heat).
-
AO600-RX3000 HOBO Estación Meteorológica Ultrasónica Compacta GSM/GPRS
The AO600-RX3000 Kit consists of a HOBO RX3000 Data logger with GSM / GPRS communication and Compact Ultrasonic Meteorological Station that measures 6 essential climatic parameters, including:Wind speed, wind direction, barometric pressure, air temperature, relative humidity, precipitation.The research grade system offers accurate and reliable...
-
AP-2000 Advanced portable multi-parameter Aquaprobe
Advanced Portable Multiparameter probes for Fresh/Salt Water Quality
3 346,00 € -
-
Aranet/Substrate Soil moisture, EC and Temp. Sensor (Wireless up to 3Km)
Aranet Substrate Sensor for Soil Moisture, EC and Temperature. VWC: 0 to 1 m3 / m3, EC: 0-10 mS / cm (bulk), T: -40 to 60ºC with 5 m cable. IP69, 868 MHz. The soil moisture sensor helps determining the optimal watering for the plants by regularly indicating the water content of the soil. The sensor is equipped with a built–in temperature sensor and EC...
-
CERES Temp. Humidity & CE Soil Sensor (SDI-12 or RS485)
Sensor of the soil temperature, soil moisture, the electrical conductivity of the soil, the complex dielectric permittivity of the soil and the electrical conductivity of the "water pores" contained in the soil hole.Both the conductivity of the soil and the water of the pores are automatically compensated by the temperature.
-
DS-72A-S LAQUA Color Touch Table Meter Kit for Water Quality
Contain: • DS-72 meter• Electrode stand• Protection cover• Power adaptor with 6 plugs• Data acquisition software in USB• 3552-10D - Platinum/Platinum black, glass-body k=1.0 conductivity cell with integrated temperature sensor, 1m cable, BNC & phono jack• 503-S - 84μS/cm, 1413μS/cm, 12.88mS/cm & 111.8mS/cm conductivity standard solutions (250ml each)
