Catalog
Loading...
fuentes RSS
No RSS feed added
Indoor and Outdoor Sensors and Probes for: Temperature, Humidity, Speed and Wind Direction, Solar Radiation, Energy and Consumption, O2, CO, CO2, Pressure, Water and Gas Quality, VOC, etc.
- Rotary Rugged Sensor is a transducer to detect the angle / speed of the system which correspondence to the rotary motion of the shaft. - Rotary Rugged Sensor is based on contactless Magnetic technology and hence has a very long life- This Transducer can be customised in several ways to have different Electrical angle, Voltage Output, Current Output,...
The piezometer cable allows multiple piezometers to be installed simply and reliably in a single well. The piezometer string and slurry tubing are placed in the well and cement and bentonite slurry is pumped until the well is filled.
Couplers compatible with HOBO Shuttle U-DTW-1 and HOBO Base Station-U4 for data loggers:- HOBO Pendant (Model: Coupler2-A)- HOBO U20 Water Level (Model: Coupler2-B)- HOBO U22 / U24 / U26 / U20L (Model: Coupler2-C)- HOBO TidbiT v2 (Model: Coupler2-D)- HOBO U23 Pro V2 (Model: Coupler2-E)
Buying in quantity or just want some useful advice?Call +34 916292106 or complete our form More info about this product.
The SS-120 measures a wavelength range of 635 to 1100 nm.The spectroradiometer is an easy-to-use, cost-effective, versatile spectral measurement system that can be interfaced to a computer.
HFP01 is the world’s most popular sensor for heat flux measurement in the soil as well as through walls and building envelopes. The total thermal resistance is kept small by using a ceramics-plastic composite body. The sensor is very robust and stable. It is suitable for long term use on one location as well as repeated installation when a measuring...
HF03 is a heat flux sensor that is applied in mobile measurements. It is combined with LI19, a high accuracy handheld read-out unit / datalogger.The combination HF03- LI19 is typically used to study heat flux levels of flares and fires, and to verify the performance of permanently installed flare radiation monitors and flare heat flux sensors.
New, completely revamped version Very thin coil diameter: down to 7 mm New connector design Accessory to secure the coil to the busbar Possibility to seal the locking of the coil
- Four selectable scales- Equalization and 90° shifting of the Rogowski coil signal- 1 A RMS full scale output for instantaneous value- Compact DIN rail enclosure- 85 ... 265 VAC power supply
Economical rain gauge. 2 Models available:Rain-o-Matic-HOBO rain gauge (1 Reed output relay) with HOBO Recorder UA-003-64.Rain-o-Matic2-HOBO rain gauge (2 output Reed relays) with HOBO Recorder UA-003-64.
◆ MQ-610 ePAR meter for scientists and serious growers.◆ The MQ-610 ePAR meter is the first in its class among leading scientists and serious growers for measuring accurately the new extended photosynthetically active radiation (ePAR) from 400 to 750 nm for all types of light sources.◆ It has been designed by the Apogee Instruments engineering team....
The MQ-510 quantum meter is designed for underwater PAR measurements and already applies the sensor dip effect correction factor to meter readings via firmware. The meter provides excellent measurements on all light sources, including LEDs.
The MQ-501 is designed to be an easy-to-use handheld meter for spot-check measurements.The meter includes the AM-001 meter mounting bracket to mount the sensor on a horizontal plane to the meter and approximately 0.17 m of cable to accommodate the bracket length.The full-spectrum sensor incorporates a blue-enhanced silicon photodiode and custom optical...
The new SQ-420 is a stand-alone PAR sensor/datalogger with 10,000 measurement internal data storage that can be uploaded to a computer. If continuously connected, the software graphs real-time PPFD (Photosynthetic Photon Flux Density) 4 YEAR WARRANTY
Green LED glows: CO2 concentration 0 to 1000 ppmYellow LED glows: CO2 concentration from 1001 to 1200 ppmRed LED glows - CO2 concentration 1201 ppm and more
SHOPPING FOR QUANTITY, OR DO YOU WANT SOME USEFUL ADVICE?Call +34 916292106 or complete our form More info about this product
AO-DA01 is a DIN-RAIL 1A Output Rogowski coil integrator installation in distribution box,in a plastic 1 module DIN-RAIL enclosure, powered directly from the mains.
Portable multi-function power analyzer with 5 rated current ranges: 100A, 600A, 1kA, 3kA, 6kA for use with Rogowski coils.
Bluetooth sensor beacon and data logger for measuring the temperature of concrete during the curing process. Can be mounted on rebars and submerged in concrete with the optional silicone holder.