MX2204 DataLogger Bluetooth HOBO TidbiT de Temperatura sumergível até 1500m

MX2204

Onset

New

Grupo 1

icon-app-store.png   en_app_rgb_wo_60.png

O registrador de temperatura da água do TBI HOBO MX2204 aproveita o poder do Bluetooth Low Energy (BLE) para fornecer medições de temperatura de alta precisão diretamente para o seu dispositivo móvel iOS ou Android. Projetado para durabilidade, este registrador resistente a água é ideal para implantações de longo prazo em córregos, lagos e oceanos. A coleta de dados no campo nunca foi tão fácil!

¿QUERES COMPRAR POR QUANTIDADE OU QUERES INFORMAÇAO ADICIONAL?
Ligue para +34 916292106 ou preencha o nosso formulário "More info about this Product

165,00 €

Imposto Excluido

Número de Canais 1 canal (temperatura)
Nº Bits ADC 16 bit
Precisão ±0.2°C
Com Display No
Classificação IP IP67
Comunicações Bluetooth BLE
Duração da Bateria 2 anos
Capacidade da Memória 96,000 medidas

Recursos destacados

  • Configuração e download sem fio conveniente via Bluetooth Low Energy (BLE)
  • A grande memória armazena 98.000 medidas
  • À prova de água a 1500 metros (5000 pés)
  • O arranque impermeável protege o registrador durante a implantação
  • O alarme LED notifica quando a temperatura excede o limite definido
  • O recurso de detecção de água conserva a vida da bateria
  • Funciona com o aplicativo gratuito HOBOmobile do Onset
  • ± 0,2 ° C (± 0,36 ° F) de precisão

Em que ambiente esse registrador de dados opera?

Este registrador de dados opera em ambientes internos, externos e subaquáticos.

Quais as medidas suportadas pelo registrador de dados?

O registrador de dados MX2204 suporta as seguintes medidas: temperatura e temperatura da água

Temperature Sensor (MX2203 and MX2204)

Range

MX2203: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water

MX2204: -20° to 70°C (-4° to 158°F) in air; -20° to 50°C (-4° to 122°F) in water, maximum sustained temperature in water 30°C (86°F)

Accuracy

±0.25°C from -20° to 0°C (±.45°F from -4° to 32°F)

±0.2°C from 0° to 70°C (±0.36°F from 32° to 158°F)

Resolution

0.01°C (0.018°F)

Drift

<0.1°C (0.18°F) per year

Response Time

MX2203: 17 minutes typical to 90% in air moving 1 m/s, unmounted;

7 minutes typical to 90% in stirred water, unmounted

MX2204: 15 minutes typical to 90% in air moving 1 m/s, unmounted;

4 minutes typical to 90% in stirred water, unmounted

 

Logger

Radio Power

1 mW (0 dBm)

Transmission Range

Approximately 30.5 m (100 ft) line-of-sight

Wireless Data Standard

Bluetooth Smart (Bluetooth Low Energy, Bluetooth 4.0)

Logger Operating Range

-20° to 70°C (-4° to 158°F)

Logging Rate

1 second to 18 hours

Buoyancy (Fresh Water)

MX2203: 3.1 g (0.11 oz) negative

MX2204: 7.6 g (0.27 oz) negative

Waterproof

MX2203: To 122 m (400 ft)

MX2204: To 1,524 m (5,000 ft)

Water Detection

Water conductivity level of 100 µS/cm or greater necessary for reliable detection of water. Deionized water or water below 100 µS/cm may not be detected.

The water conductivity circuit may not reliably detect water that has frozen around the electrodes, i.e. below 0°C (32°F).

Memory

96,000 measurements

Battery

CR2477 3V lithium, user replaceable in MX2303, non-replaceable in MX2304

Battery Life

3 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off disabled in software.

5 years, typical at 25°C (77°F) with logging interval of 1 minute and Bluetooth Always Off or Bluetooth Off Water Detect enabled in software.

Faster logging intervals and statistics sampling intervals, burst logging, remaining connected with the app, excessive downloads, and paging may impact battery life.

To ensure proper battery installation, see Battery Information for detailed instructions on replacing the battery in the MX2203 logger.

Time Accuracy

± 1 minute per month at 25°C (77°F)

Full Memory Dowload

Approximately 45 seconds; may take longer the farther the device is from the logger

Wetted Materials

MX2303: Polypropylene case, EPDM O-ring, stainless steel screws, Santoprene® (TPE) boot

MX2304: Epoxy case, Santoprene (TPE) boot

Dimensions

MX2203: 4.45 x 7.32 x 3.58 cm (1.75 x 2.88 x 1.41 inches)

MX2204: 4.06 x 6.99 x 3.51 cm (1.6 x 2.75 x 1.38 inches)

Weight

MX2203: 36.2 g (1.28 oz)

MX2204: 32.8 g (1.16 oz)

The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

VER WEBINAR:

30 other products in the same category: